Connecting Audio from External Components
02 Connections
S
DIGITAL |
|
|
| HDMI IN | |
AUDIO IN |
| |
|
|
OPTICAL
|
|
| COMPONENT OUT |
LAN | |||
| |||
|
|
|
|
HDMI OUT
WIRELESS LAN | AUX IN | VIDEO OUT |
Optical Cable (not supplied)
Set-Top Box
Red
VCR
White
Audio Cable (not supplied)
If the external analog component has only one Audio Out, connect either left or right.
OPTICAL
AUX
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver
1.Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component.
2.Press the FUNCTION button to select D.IN input.
• The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM
✎NOTE
To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports only DTS and Dolby Digital audio, MPEG audio (bit stream) is not supported.
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
1.Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.
•Be sure to match connector colors.
2.Press the FUNCTION button to select AUX input.
• The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM
✎NOTE
You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.