Musical Room Calibration
By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a
ASC IN
ASC
microphone
✎NOTE
Setting the Musical Room Calibration function takes about 3 minutes.
You can only use the Musical Room Calibration setup if there is no disc in the player.
If the ASC microphone is disconnected during the Musical Room Calibration setup, the setup will be canceled.
When the Musical Room Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work.
If the product is connected to external devices or other components (such as an iPod, AUX, D.IN), the Musical Room Calibration Setup may not work properly.
EQ Optimizer
Set optimal EQ automatically depending on the region.
•Off : Turn EQ Optimizer off.
•On : Turn EQ Optimizer on.
03 Setup
Musical Room Calibration
Turns the Musical Room Calibration mode on and off.
•Off: You hear the speakers set to the User Speaker Setting values.
•On: You hear the speakers set to the Musical Room Calibration mode values.
Musical Room Calibration Setting
1.Plug the ASC microphone into the ASC IN jack.
2.Place the ASC microphone at the listening position.
•Musical Room Calibration runs automatically in the following sequence:
Front Left Center Front Right
Surround Right Surround Left
Subwoofer
•Press the RETURN button to cancel the Musical Room Calibration Setting.
HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled On and Off.
•Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only.
•On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
✎NOTE
HDMI Audio is automatically