Seagate ST9808211A, ST960822A, ST9408114A Reliability, Agency certification, Safety certification

Page 20

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Mean time between failures

330,000 power-on hours

(MTBF)

 

At nominal power, 25°C ambient temperature.

 

 

Max case temperature: 65°C at the case measurement location shown in Figure 4.

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

 

 

Service Life

5 Years

 

 

 

Warranty

 

5 Years

 

 

 

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

14

Momentus 5400.2 Product Manual, Rev. D

Image 20
Contents Momentus5400.2 ST9100823A ST9808211A ST960822A ST9408114A ST9308110APage Contents Momentus 5400.2 Product Manual, Rev. D List of Figures Momentus 5400.2 Product Manual, Rev. D Introduction Momentus 5400.2 Pata disc driveMomentus 5400.2 Product Manual, Rev. D Specifications Drive specificationsSpecification summary Specifications Default logical geometry LBA modeFormatted capacity Physical organizationRecording and interface technology Physical characteristicsTechnology Specification Seek time Time to readyTypical seek times msec Read Write Time to ready Typical MaxPower specifications Voltage tolerance Typical current profileConducted noise Power-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunitySafety certification Measurement type SpecificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 Environmental protection European Union Restriction of Hazardous Substances RoHSConfiguring and mounting the drive Handling and static discharge precautionsJumper settings Master/slave configurationDrive mounting Cable-select optionATA interface signals and connector pins Connector signalsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameCommand name Command code in hex ATA-standard commands Supported ATA commandsSupported commands ATA-standard security commands Command name Command code in hexATA-standard power-management commands Supported commands Identify Device command Word Description Value0C5AH AsciiXx07H FffehDescription if bit is set to Bit Word Bit WordSet Features command Features register valuesInstallation considerations Compatibility summarySystem Compatibility Tested systemsVendor Release Revision Bios versions testedTested Bios versions Compatibility test configurations Operating system versions testedSoftware utilities Other certificationSeagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index NumericsPage Page Momentus 5400.2 Product Manual, Rev. D Page Seagate Technology LLC

ST9408114A, ST9808211A, ST9308110A, ST9100823A, ST960822A specifications

Seagate has long been a leader in the hard disk drive industry, and its array of models, such as ST960822A, ST9100823A, ST9308110A, ST9808211A, and ST9408114A, exemplifies the company's commitment to innovation, reliability, and performance. Each of these models offers unique features and specifications that cater to a variety of storage needs.

The Seagate ST960822A stands out with 60GB capacity and a 5400 RPM spindle speed. It employs the Ultra ATA/100 interface, facilitating rapid data transfer rates up to 100MB/s. This model is designed for compact systems and provides ample storage for files, applications, and multimedia. Its advanced power management features also help in reducing energy consumption, making it an efficient choice for mobile and desktop computing.

Moving on to the ST9100823A, this drive offers a larger storage capacity of 100GB, also operating at 5400 RPM. It incorporates the Serial ATA interface, which enhances the drive's performance and allows for easier connection in modern computer systems. The ST9100823A is built with Seagate’s Quiet Airflow technology, ensuring quieter operations, while its rugged design promotes endurance and durability, making it suitable for both desktop and external storage uses.

The ST9308110A takes performance up a notch with a capacity of 300GB. This model leverages the SATA interface, providing faster data throughput, making it ideal for data-intensive applications including gaming and video editing. It features 8MB cache memory, which aids in quicker data retrieval and overall system responsiveness. This drive is a solid choice for users seeking high performance without sacrificing storage space.

Next, the ST9808211A expands on storage capabilities with 80GB capacity. Like the previous models, it runs at a speed of 5400 RPM, but its enhanced caching mechanisms optimize read and write operations. The drive is particularly suited for multimedia applications, where speed and storage are paramount, ensuring that users can store and retrieve large files seamlessly.

Lastly, the ST9408114A features a compact 40GB capacity, yet delivers exceptional speed with its 7200 RPM mechanism. This drive is tailored toward performance-oriented applications, such as gaming and high-performance computing scenarios. The combination of its increased RPM and fast access times make it a robust choice for users desiring responsiveness in their systems.

Collectively, these Seagate models embody a range of technologies and characteristics, from the ATA interface to advanced power management, making them suitable for a variety of applications. Whether one needs high capacity, enhanced performance, or reliability, Seagate continues to offer drives that meet diverse storage requirements in an increasingly data-driven world.