Seagate ST9100823A, ST9808211A, ST960822A, ST9408114A manual Drive mounting, Cable-select option

Page 24

3.2.2Cable-select option

Computers that use cable select determine the master and slave drives by selecting or deselecting pin 28, CSEL, on the interface bus. Master and slave drives are determined by their physical position on the cable. To enable cable select, set a jumper as shown in Figure 3. Refer to your computer manual to determine whether your computer supports this option.

3.3Drive mounting

You can mount the drive using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions (dimensions in inches with mm in parentheses). Follow these important mounting precautions when mounting the drive:

Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.

Use only M3 x 0.5 mounting screws.

Do not overtighten the mounting screws (maximum torque: 4.0 inch-lb).

Four (4) threads (0.080 inches) minimum screw engagement recommended.

.157

(3.9878)

.399

(10.135)

2.750 +/- .010

(69.85 +/- .25)

3.945 +/-0.010

(100.2 +/-.25)

Breather Hole Do not cover or seal.

0.490 +/- .010

(12.446 +/- .254)

0.673 +/- .010

(17.09 +/- .254)

Recommended case temp.

 

 

 

 

 

3.567

 

 

 

 

 

 

.551

 

(90.60)

measurement location

 

 

 

(13.99)

 

 

 

2X M3 X 0.5-6H Mounting holes Both sides

.374 +/- .008

(9.5 +/- .2)

2X .118 (3.00) Both sides

.551

(13.99)

inches

(mm)

.399

(10.135)

Detail A

3.567

(90.60)

.12 min. full thread

4X M3 X 0.5-6H Mounting holes

.10 min. full thread

2.430

(61.72)

.160

Detail A

(4.06)

Figure 4. Mounting dimensions—top, side and end view

18

Momentus 5400.2 Product Manual, Rev. D

Image 24
Contents Momentus5400.2 ST9100823A ST9808211A ST960822A ST9408114A ST9308110APage Contents Momentus 5400.2 Product Manual, Rev. D List of Figures Momentus 5400.2 Product Manual, Rev. D Introduction Momentus 5400.2 Pata disc driveMomentus 5400.2 Product Manual, Rev. D Drive specifications Specification summarySpecifications Specifications Default logical geometry LBA modeFormatted capacity Physical organizationPhysical characteristics Technology SpecificationRecording and interface technology Seek time Time to readyTypical seek times msec Read Write Time to ready Typical MaxPower specifications Typical current profile Conducted noiseVoltage tolerance Power-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunitySafety certification Measurement type SpecificationReliability Agency certificationKorean RRL Australian C-Tick N176FCC verification Environmental protection European Union Restriction of Hazardous Substances RoHSConfiguring and mounting the drive Handling and static discharge precautionsJumper settings Master/slave configurationDrive mounting Cable-select optionATA interface signals and connector pins Connector signalsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameSupported ATA commands Supported commandsCommand name Command code in hex ATA-standard commands Command name Command code in hex ATA-standard power-management commandsATA-standard security commands Supported commands Identify Device command Word Description Value0C5AH AsciiXx07H FffehDescription if bit is set to Bit Word Bit WordSet Features command Features register valuesInstallation considerations Compatibility summarySystem Compatibility Tested systemsBios versions tested Tested Bios versionsVendor Release Revision Compatibility test configurations Operating system versions testedSoftware utilities Other certificationSeagate Technology support services InternetPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index NumericsPage Page Momentus 5400.2 Product Manual, Rev. D Page Seagate Technology LLC

ST9408114A, ST9808211A, ST9308110A, ST9100823A, ST960822A specifications

Seagate has long been a leader in the hard disk drive industry, and its array of models, such as ST960822A, ST9100823A, ST9308110A, ST9808211A, and ST9408114A, exemplifies the company's commitment to innovation, reliability, and performance. Each of these models offers unique features and specifications that cater to a variety of storage needs.

The Seagate ST960822A stands out with 60GB capacity and a 5400 RPM spindle speed. It employs the Ultra ATA/100 interface, facilitating rapid data transfer rates up to 100MB/s. This model is designed for compact systems and provides ample storage for files, applications, and multimedia. Its advanced power management features also help in reducing energy consumption, making it an efficient choice for mobile and desktop computing.

Moving on to the ST9100823A, this drive offers a larger storage capacity of 100GB, also operating at 5400 RPM. It incorporates the Serial ATA interface, which enhances the drive's performance and allows for easier connection in modern computer systems. The ST9100823A is built with Seagate’s Quiet Airflow technology, ensuring quieter operations, while its rugged design promotes endurance and durability, making it suitable for both desktop and external storage uses.

The ST9308110A takes performance up a notch with a capacity of 300GB. This model leverages the SATA interface, providing faster data throughput, making it ideal for data-intensive applications including gaming and video editing. It features 8MB cache memory, which aids in quicker data retrieval and overall system responsiveness. This drive is a solid choice for users seeking high performance without sacrificing storage space.

Next, the ST9808211A expands on storage capabilities with 80GB capacity. Like the previous models, it runs at a speed of 5400 RPM, but its enhanced caching mechanisms optimize read and write operations. The drive is particularly suited for multimedia applications, where speed and storage are paramount, ensuring that users can store and retrieve large files seamlessly.

Lastly, the ST9408114A features a compact 40GB capacity, yet delivers exceptional speed with its 7200 RPM mechanism. This drive is tailored toward performance-oriented applications, such as gaming and high-performance computing scenarios. The combination of its increased RPM and fast access times make it a robust choice for users desiring responsiveness in their systems.

Collectively, these Seagate models embody a range of technologies and characteristics, from the ATA interface to advanced power management, making them suitable for a variety of applications. Whether one needs high capacity, enhanced performance, or reliability, Seagate continues to offer drives that meet diverse storage requirements in an increasingly data-driven world.