Seagate ST1000NM0033 manual Environmental Limits

Page 24

2.7ENVIRONMENTAL LIMITS

Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum wet bulb temperature is 82°F (28°C).

2.7.1Temperature a. Operating

The drive meets the operating specifications over a 41°F to 140°F (5°C to 60°C) drive case temperature range with a maximum temperature gradient of 36°F (20°C) per hour.

The maximum allowable drive case temperature is 60°C. See Figure 9 for HDA case temperature measurement location

The MTBF specification for the drive assumes the operating environment is designed to maintain nominal case temperature. The rated MTBF is based upon a sustained case temperature of 104°F (40°C). Occasional excursions in operating temperature between the rated MTBF temperature and the maximum drive operating case temperature may occur without impact to the rated MTBF temperature. However, continual or sustained operation at case temperatures beyond the rated MTBF temperature will degrade the drive MTBF and reduce product reliability.

Air flow may be required to achieve consistent nominal case temperature values (see Section 3.4). To confirm that the required cooling is provided for the electronics and HDA, place the drive in its final mechanical configuration, and perform random write/read operations. After the temperatures stabilize, measure the case temperature of the drive.

b.Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.

HDA Temp.

Check Point

Figure 9. Location of the HDA temperature check point

NOTE

Image is for reference only, may not represent actual drive

2.7.2Humidity

2.7.2.1Relative humidity

Operating:

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating:

5% to 95% noncondensing (30% per hour max)

 

 

2.7.3Altitude

Operating:

–304.8 m to 3048 m (–1000 ft. to 10,000+ ft.)

 

 

Nonoperating:

–304.8 m to 12,192 m (–1000 ft. to 40,000+ ft.)

 

 

2.7.4Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

20

CONSTELLATION ES.3 SERIAL ATA PRODUCT MANUAL, REV. A

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Constellation ES.3 Serial ATA Document Revision History Contents Serial ATA Sata interface Seagate Technology Support Services Constellation ES.3 Serial ATA Product Manual, Rev. a Introduction About the Serial ATA Interface Drive Specifications Specification Summary TablesDrive specification LBA mode Default Logical GeometryFormatted Capacity Recording and Interface TechnologyPower Specifications 4TB Drive DC power requirements Peak operating current sequential write3TB Drive DC power requirements 2TB Drive DC power requirements 1TB Drive DC power requirements Typical current profiles TB Typical 5V startup and operation current profileTypical current profiles Typical current profiles Typical current profiles Power-management modes Active modeIdle mode Sleep modeExtended Power Conditions PowerChoiceTM PowerChoice is invoked using one of two methodsPowerChoice Manufacture Default Power Condition Timer Values PowerChoice Supported Extended Power Condition IndentifiersEnvironmental Limits Acoustics Test for Prominent Discrete Tones PdtsElectromagnetic Immunity ReliabilityRadio frequency environments Agency Certification Environmental Protection China Restriction of Hazardous Substances RoHS DirectiveCorrosive Environment Reference DocumentsProduct Warranty ShippingStorage Product repair and return informationHandling and STATIC-DISCHARGE Precautions Configuring the DriveSerial ATA Cables and Connectors Drive Mounting Mechanical specifications Mounting dimensions-top, side and end viewPurpose Seagate Enterprise SEDsLevel 2 security Controlled Access Data EncryptionRandom Number Generator RNG Drive LockingAuthenticated Firmware Download Power RequirementsSupported Commands Data BandsATA Security Erase Unit Command on SED Sata Drives RevertspSerial ATA Device Plug Connector PIN Definitions Serial ATA connector pin definitionsHOT-PLUG Compatibility Supported ATA Commands Supported ATA commandsF6H Identify Device command CEHXxxx H Description if bit is set to BIT Word Set Features command Set Features command values3 S.M.A.R.T. commands M.A.R.T. commandsConstellation ES.3 Serial ATA Product MANUAL, REV. a Index Constellation ES.3 Serial ATA Product MANUAL, REV. a Index Constellation ES.3 Serial ATA Product MANUAL, REV. a Page Seagate Technology LLC
Related manuals
Manual 76 pages 29.86 Kb

ST1000NM0033 specifications

The Seagate ST1000NM0033 is a high-performance hard disk drive (HDD) designed specifically for enterprise applications. With a storage capacity of 1TB, it offers a balance of performance, reliability, and efficiency, making it suitable for data centers, cloud storage, and server environments. Built with Seagate's robust engineering, the ST1000NM0033 is ideal for handling heavy workloads and intensive data processes.

One of the standout features of this HDD is its rotational speed of 7200 RPM. This speed allows for quick data access and fast read/write operations, which is essential for data-intensive applications. The drive is equipped with 64MB of cache, further enhancing its efficiency by speeding up data retrieval for frequently accessed files.

Another key characteristic of the ST1000NM0033 is its SATA interface, which typically facilitates high-bandwidth data transfer rates. With a sustained data transfer rate of up to 160 MB/s, it ensures that large files, such as videos and databases, can be transferred swiftly, minimizing downtime and improving overall system performance.

The drive's durability is backed by Seagate’s Advanced Format technology, which enhances the format compatibility, storage efficiency, and reliability of the drive through improved error correction. With a mean time between failures (MTBF) rating of 1 million hours, users can trust the STA0033 to provide exceptional longevity and stability, critical in enterprise environments where data integrity is paramount.

Furthermore, the ST1000NM0033 supports various workload types due to its design optimized for multi-user environments. The drive can handle up to 180TB/year workload rate, making it capable of supporting applications with high data demand.

Environmentally, Seagate ensures that this model is energy efficient, contributing to reduced power consumption in enterprise settings. The drive operates effectively within a specified temperature range, ensuring that it remains operational under different environmental conditions.

In summary, the Seagate ST1000NM0033 is an excellent choice for businesses seeking a reliable, high-capacity HDD with robust performance features. Its combination of speed, efficiency, durability, and capacity positions it as a strong contender in the enterprise storage solutions market. With its extensive feature set, it continues to cater to the demanding needs of modern data centers and enterprise applications.
Top Page Image Contents