Seagate ST1000NM0033 manual Supported ATA Commands, Supported ATA commands

Page 38

Notes:

1.All pins are in a single row, with a 1.27mm (0.050”) pitch.

2.The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are:

•the ground pins P4 and P12.

•the pre-charge power pins and the other ground pins.

•the signal pins and the rest of the power pins.

3.There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate back- plane configuration.

4.All used voltage pins (Vx) must be terminated.

6.3SUPPORTED ATA COMMANDS

The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification. See “S.M.A.R.T. commands” on page 41.for details and subcommands used in the S.M.A.R.T. implementation.

Table 9 Supported ATA commands

COMMAND NAME

COMMAND CODE (IN HEX)

 

 

 

 

Check Power Mode

E5H

 

Download Microcode

92H

 

Execute Device Diagnostics

90H

 

Flush Cache

E7H

 

Flush Cache Extended

EAH

 

Identify Device

ECH

 

Idle

E3H

 

Idle Immediate

E1H

 

NoP

00H

 

Read Buffer

E4H

 

Read Buffer DMA

E9H

 

Read DMA

C8H

 

Read DMA Extended

25H

 

Read FPDMA Queued

60H

 

Read Log DMA Ext

47H

 

Read Log Ext

2FH

 

Read Multiple

C4H

 

Read Multiple Extended

29H

 

Read Native Max Address

F8H

 

Read Native Max Address Extended

27H

 

Read Sectors

20H

 

Read Sectors Extended

24H

 

Read Sectors Without Retries

21H

 

Read Verify Sectors

40H

 

Read Verify Sectors Extended

42H

 

Read Verify Sectors Without Retries

41H

 

Request Sense Data Ext

0BH

 

34

CONSTELLATION ES.3 SERIAL ATA PRODUCT MANUAL, REV. A

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Constellation ES.3 Serial ATA Document Revision History Contents Serial ATA Sata interface Seagate Technology Support Services Constellation ES.3 Serial ATA Product Manual, Rev. a Introduction About the Serial ATA Interface Drive Specifications Specification Summary TablesDrive specification Formatted Capacity LBA modeDefault Logical Geometry Recording and Interface TechnologyPower Specifications 4TB Drive DC power requirements Peak operating current sequential write3TB Drive DC power requirements 2TB Drive DC power requirements 1TB Drive DC power requirements Typical current profiles TB Typical 5V startup and operation current profileTypical current profiles Typical current profiles Typical current profiles Idle mode Power-management modesActive mode Sleep modeExtended Power Conditions PowerChoiceTM PowerChoice is invoked using one of two methodsPowerChoice Manufacture Default Power Condition Timer Values PowerChoice Supported Extended Power Condition IndentifiersEnvironmental Limits Acoustics Test for Prominent Discrete Tones PdtsRadio frequency environments Electromagnetic ImmunityReliability Agency Certification Corrosive Environment Environmental ProtectionChina Restriction of Hazardous Substances RoHS Directive Reference DocumentsStorage Product WarrantyShipping Product repair and return informationSerial ATA Cables and Connectors Handling and STATIC-DISCHARGE PrecautionsConfiguring the Drive Drive Mounting Mechanical specifications Mounting dimensions-top, side and end viewLevel 2 security PurposeSeagate Enterprise SEDs Random Number Generator RNG Controlled AccessData Encryption Drive LockingSupported Commands Authenticated Firmware DownloadPower Requirements Data BandsATA Security Erase Unit Command on SED Sata Drives RevertspHOT-PLUG Compatibility Serial ATA Device Plug Connector PIN DefinitionsSerial ATA connector pin definitions Supported ATA Commands Supported ATA commandsF6H Identify Device command CEHXxxx H Description if bit is set to BIT Word Set Features command Set Features command values3 S.M.A.R.T. commands M.A.R.T. commandsConstellation ES.3 Serial ATA Product MANUAL, REV. a Index Constellation ES.3 Serial ATA Product MANUAL, REV. a Index Constellation ES.3 Serial ATA Product MANUAL, REV. a Page Seagate Technology LLC
Related manuals
Manual 76 pages 29.86 Kb

ST1000NM0033 specifications

The Seagate ST1000NM0033 is a high-performance hard disk drive (HDD) designed specifically for enterprise applications. With a storage capacity of 1TB, it offers a balance of performance, reliability, and efficiency, making it suitable for data centers, cloud storage, and server environments. Built with Seagate's robust engineering, the ST1000NM0033 is ideal for handling heavy workloads and intensive data processes.

One of the standout features of this HDD is its rotational speed of 7200 RPM. This speed allows for quick data access and fast read/write operations, which is essential for data-intensive applications. The drive is equipped with 64MB of cache, further enhancing its efficiency by speeding up data retrieval for frequently accessed files.

Another key characteristic of the ST1000NM0033 is its SATA interface, which typically facilitates high-bandwidth data transfer rates. With a sustained data transfer rate of up to 160 MB/s, it ensures that large files, such as videos and databases, can be transferred swiftly, minimizing downtime and improving overall system performance.

The drive's durability is backed by Seagate’s Advanced Format technology, which enhances the format compatibility, storage efficiency, and reliability of the drive through improved error correction. With a mean time between failures (MTBF) rating of 1 million hours, users can trust the STA0033 to provide exceptional longevity and stability, critical in enterprise environments where data integrity is paramount.

Furthermore, the ST1000NM0033 supports various workload types due to its design optimized for multi-user environments. The drive can handle up to 180TB/year workload rate, making it capable of supporting applications with high data demand.

Environmentally, Seagate ensures that this model is energy efficient, contributing to reduced power consumption in enterprise settings. The drive operates effectively within a specified temperature range, ensuring that it remains operational under different environmental conditions.

In summary, the Seagate ST1000NM0033 is an excellent choice for businesses seeking a reliable, high-capacity HDD with robust performance features. Its combination of speed, efficiency, durability, and capacity positions it as a strong contender in the enterprise storage solutions market. With its extensive feature set, it continues to cater to the demanding needs of modern data centers and enterprise applications.
Top Page Image Contents