Seagate ST1500VM002, ST2000VM002 manual Spinup Idle* † 151 303 Operating 374 256 Standby 085 Sleep

Page 15

www.seagate.comDrive Specifications

• Spinup power

Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.

• Read/write power and current

Read/write power is measured with the heads on track, based on a 16-sector write followed by a 32-ms delay, then a 16-sector read followed by a 32-ms delay.

• Operating power and current (CE profile)

Operating power is measured by simulating a typical PVR operating environment, using a 50% write, 50% read algorithm.

• Idle mode power

Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location.

• Standby mode

During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down mode.

Table 2 DC power requirements

Power dissipation (3-disk values shown)

Avg (watts 25°C)

Avg 5V typ amps

Avg 12V typ amps

 

 

 

 

Spinup

2.0

 

 

 

 

Idle* †

4.5

0.151

0.303

 

 

 

 

Operating

4.93

.374

.256

 

 

 

 

Standby

0.50

0.085

0.01

 

 

 

 

Sleep

0.50

0.085

0.01

 

 

 

 

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

†5W IDLE, Standby and Sleep,with DIPLM Enabled

Pipeline HD SATA Product Manual, Rev. B

15

Image 15
Contents 100633414 Rev. B January Pipeline HDRevision Date Description of changes Document Revision HistoryContents Pipeline HD Sata Product Manual, Rev. B Figures Pipeline HD Sata Product Manual, Rev. B Seagate Technology Support Services Pipeline HD Sata Product Manual, Rev. B About the Serial ATA Interface IntroductionIntroduction Drive specification ST2000VM002 ST1500VM002 Specification summary tablesDrive Specifications Recording and interface technology LBA modeDefault logical geometry Formatted capacitySeek time Physical characteristicsPower specifications Power consumptionSpinup Idle* † 151 303 Operating 374 256 Standby 085 Sleep Typical Current Profiles Voltage tolerance Power-management modesPower modes Heads Spindle Buffer Conducted noiseAltitude Environmental specifications Drive case temperatureTemperature gradient HumidityNonoperating vibration Vibration2000GB and 1500GB models Operating vibrationIdle Seek All models AcousticsTest for Prominent Discrete Tones PDTs Electromagnetic immunityFCC verification WarrantyAgency certification Safety certification Electromagnetic compatibilityChina Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment Drive Specifications Handling and static-discharge precautions Configuring the driveSerial ATA cables and connectors Attaching Sata cabling Drive mountingMounting dimensions 2000 and 1500GB models Configuring and Mounting the Drive Ground 2nd mate Differential signal pair a from PHY Ground 2nd mate Differential signal pair B from PHYSegment Pin Function Definition Supported ATA commands Command name Command code in hexE5H E3H E7HEAH ECHF1H F3HF4H F5HWord Description Value Identify Device commandNumber of sectors transferred during a Read Multiple Number of current logical headsNumber of current logical sectors per logical track 57-58 Current capacity in sectors160-254 ATA-reserved 0000H 255 Integrity word XxA5H Hardware reset valueBE01H FffehBit Word Set Features command Code in features register A.R.T. command A.R.T. commandsEprml IndexPipeline HD Sata Product Manual, Rev. B Pipeline HD Sata Product Manual, Rev. B Pipeline HD Sata Product Manual, Rev. B Page Seagate Technology LLC

ST2000VM002, ST1500VM002 specifications

The Seagate ST1500VM002 and ST2000VM002 are part of the Seagate Video 3.5 Series, designed specifically for surveillance systems and DVRs. These hard drives provide robust storage solutions tailored to handle the high demands of continuous video recording and playback.

Both models boast a 3.5-inch form factor and utilize SATA III interfaces, ensuring fast data transfer rates essential for processing large video files from multiple security cameras. The ST1500VM002 offers a storage capacity of 1.5TB, while the ST2000VM002 provides an enhanced capacity of 2TB, making them suitable for extensive surveillance setups that may require longer retention of video content.

One of the most significant features of these drives is their support for 24/7 operation, allowing them to perform reliably and efficiently under constant load. This aspect is particularly important for security applications where data is consistently being recorded and accessed without downtime. Moreover, both models are optimized for high workload rates, capable of handling workloads of up to 180TB per year, which is essential for the rigorous demands of surveillance use.

The Seagate ST1500VM002 and ST2000VM002 also feature advanced technologies that help enhance performance and reliability. These drives incorporate AgileArray technology, which optimizes drive performance in multi-drive systems and improves RAID performance. This technology also features error recovery controls, which are critical for maintaining data integrity over time.

In terms of reliability, both drives are built with robust components designed to withstand the harsh conditions typically associated with surveillance environments. They come equipped with high shock resistance, ensuring they remain functional in various conditions, preserving valuable data even in the event of physical impacts or vibrations.

Furthermore, they include features like Seagate Rescue Data Recovery Services, providing customers peace of mind knowing that their data can be recovered in unexpected scenarios. Overall, the Seagate ST1500VM002 and ST2000VM002 are excellent choices for anyone in need of high-capacity, reliable storage solutions for their surveillance needs, offering a blend of advanced technology, robust performance, and dependable data integrity.