Seagate ST31500341AS, ST31000333AS Nonoperating shock 1500, 1000 and 640 GB models, Vibration

Page 22

2.8.5.2Nonoperating shock

1500, 1000 and 640 GB models

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

320 and 160 GB models

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

2.8.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.8.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

2–22 Hz	0.25 Gs (Limited displacement)

22–350 Hz	0.50 Gs

350–500 Hz	0.25 Gs

2.8.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

5–22 Hz	2.0	Gs (limited displacement)

22–350 Hz	5.0 Gs

350–500 Hz	2.0	Gs

16	Barracuda 7200.11 Serial ATA Product Manual, Rev. C

Image 22

Contents Barracuda 7200.11 Serial ATA Revision history Revision Date Sheets affected or commentsContents Barracuda 7200.11 Serial ATA Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1500 and 1000 Gbyte models Will display the warranty information for your drive Drive specifications summary for 640 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. C Drive specifications summary for 320 and 160 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. C Formatted capacity Default logical geometryLBA mode Recording and interface technologySeek time Physical characteristicsTypical seek times msec Read Write Power specifications Start/stop timesDC power requirements Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Vibration Nonoperating shock 1500, 1000 and 640 GB models160 GB models Operating vibrationFluid Dynamic Bearing FDB motor acoustics AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsAgency certification Safety certificationReliability Electromagnetic compatibilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions 1500, 1000 and 640 GB models Drive mountingMounting dimensions 320 and 160 GB models Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordWord Set Features command Set Features command valuesM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda 7200.11 Serial ATA Product Manual, Rev. C Page Disc Drive, Scotts Valley, California 95066-4544, USA