Seagate ST3640630AS, ST31000340AS manual Vibration, Operating vibration, Nonoperating vibration

Page 22

2.8.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.8.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

2–22 Hz	0.25 Gs (Limited displacement)

22–350 Hz	0.50 Gs

350–500 Hz	0.25 Gs

2.8.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

1000 GB, 750 GB and 500 GB models

5–22 Hz	2.0	Gs (limited displacement)

22–350 Hz	5.0 Gs

350–500 Hz	2.0	Gs

16	Barracuda 7200.11 Serial ATA Product Manual, Rev. G

Image 22

Contents Barracuda 7200.11 Serial ATA Revision history Revision Date Sheets affected or commentsContents Barracuda 7200.11 Serial ATA Product Manual, Rev. G List of Figures Typical 5V startup and operation current profilePage Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 750 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. G Drive specifications summary for 640 Gbyte models Will display the warranty information for your drive Drive specifications summary for 500 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. G Formatted capacity Default logical geometryLBA mode Recording and interface technologyStart/stop times Physical characteristicsSeek time Typical seek times msec Read WritePower specifications Typical 5V startup and operation current profile Typical 12V startup and operation current profileIdle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating vibration VibrationOperating vibration 1000 GB, 750 GB and 500 GB modelsFluid Dynamic Bearing FDB motor acoustics AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsAgency certification Safety certificationReliability Electromagnetic compatibilityAustralian C-Tick N176 Korean RRLFCC verification 383 Environmental protectionCorrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions Drive mountingBarracuda 7200.11 Serial ATA Product Manual, Rev. G Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordWord Set Features command Set Features command valuesM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support Seagate Technology support servicesTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda 7200.11 Serial ATA Product Manual, Rev. G Page Disc Drive, Scotts Valley, California 95066-4544, USA

Related manuals

Manual 46 pages 42.51 Kb