Seagate ST3500620AS, ST31000340AS manual Korean RRL, Australian C-Tick N176, FCC verification

Page 25

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

• Family name: Barracuda 7200.11

• Certificate number: 1000 GB-

STX- ST31000340AS (B)

750 GB-

STX- ST31000340AS (B)

640 GB-

STX- ST31000340AS (B)

500 GB-

STX- ST3500320AS (B)

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

2.12.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

Reorient the receiving antenna.

Move the device to one side or the other of the radio or TV.

Move the device farther away from the radio or TV.

Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, you should consult your dealer or an experienced radio/television technician for additional suggestions. You may find helpful the following booklet prepared by the Federal Communications Commission: How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Super- intendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication num- ber 004-000-00345-4.

Barracuda 7200.11 Serial ATA Product Manual, Rev. G

19

Image 25
Contents Barracuda 7200.11 Serial ATA Revision Date Sheets affected or comments Revision historyContents Barracuda 7200.11 Serial ATA Product Manual, Rev. G Typical 5V startup and operation current profile List of FiguresPage Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 750 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. G Drive specifications summary for 640 Gbyte models Will display the warranty information for your drive Drive specifications summary for 500 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. G LBA mode Default logical geometryFormatted capacity Recording and interface technologySeek time Physical characteristicsStart/stop times Typical seek times msec Read WritePower specifications Typical 12V startup and operation current profile Typical 5V startup and operation current profileActive mode Power-management modesIdle mode Sleep modeEnvironmental specifications Operating vibration VibrationNonoperating vibration 1000 GB, 750 GB and 500 GB modelsElectromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTsReliability Safety certificationAgency certification Electromagnetic compatibilityAustralian C-Tick N176 Korean RRLFCC verification 383  Environmental protectionCorrosive environment Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensionsBarracuda 7200.11 Serial ATA Product Manual, Rev. G Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordWord Set Features command values Set Features commandM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support Seagate Technology support servicesTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda 7200.11 Serial ATA Product Manual, Rev. G Page Disc Drive, Scotts Valley, California 95066-4544, USA
Related manuals
Manual 46 pages 42.51 Kb

ST3640630AS, ST3500820AS, ST3500320AS, ST3500620AS, ST31000640AS specifications

Seagate has long been a prominent player in the hard drive industry, and its line of SATA drives, including the ST3640330AS, ST3750330AS, ST3750630AS, ST31000340AS, and ST31000640AS, showcases a blend of performance, reliability, and advanced technology. These drives cater to various user needs, from consumer desktops to enterprise applications.

The ST3640330AS and ST3750330AS models are designed with a 7200 RPM spinning speed, ensuring fast data throughput for gaming, multimedia, and everyday computing tasks. With a SATA interface and compatibility with the latest systems, these drives are ideal for users seeking efficient storage solutions. The ST3640330AS provides 640 GB of storage, while the ST3750330AS boasts a generous 750 GB capacity, offering ample space for large files and applications.

Moving to the ST3750630AS, this model continues the trend of high performance, offering 750 GB of storage but enhanced with Seagate’s advanced error-correcting technology. It also features an updated cache architecture that optimizes read and write speeds while minimizing latency. This drive is particularly beneficial for users who require reliable backups and quick access to data.

The ST31000340AS and ST31000640AS are both part of Seagate’s 1 TB series and are engineered for durability and longevity. The ST31000340AS features traditional SATA technology, providing users with a balance between cost and performance. On the other hand, the ST31000640AS integrates improved power management features that result in lower energy consumption without compromising performance. This makes it a suitable choice for environmentally-conscious consumers or businesses looking to reduce operational costs.

All models feature Seagate's proprietary technologies such as SoftSonic drives, which result in quieter operation, and advanced power management capabilities that extend the lifespan of the hard drives. They are equipped with robust error recovery and data security features, ensuring data integrity and protecting against data loss.

Overall, the Seagate ST3640330AS, ST3750330AS, ST3750630AS, ST31000340AS, and ST31000640AS drives represent a comprehensive range of storage solutions that combine capacity, speed, and cost-effectiveness, making them a popular choice for a variety of users, from casual consumers to demanding enterprise environments.