Samsung HT-BD1252 Turn the Stand upside-down and connect it to the Stand Base, Screwdriver

How to Install the Speaker on the Stand (HT-BD1252/HT-BD1255)

ENG

1.Turn the STAND upside-down and connect it to the STAND BASE.

2.Insert fi ve small SCREWS into the fi ve holes marked with arrows using a screwdriver as shown in the illustration.

3.Connect upper SPEAKER to the assembled STAND.

4.Insert another large SCREW into the hole on the rear of the speaker marked with arrow using

a screwdriver.

HT-BD1250

Center Speaker

Front Speaker (R) Rear Speaker (R)

12

STAND BASE

STAND

34

SPEAKER

STAND

Front Speaker (L) Subwoofer Speaker

Rear Speaker (L)

● CONNECTIONS

HT-BD1252

Center Speaker

Front Speaker (R)

Front Speaker (L)

Subwoofer Speaker

Rear Speaker (R) Rear Speaker (L)

HT-BD1255

	Center Speaker
Front Speaker (R)			Front Speaker (L)
		Subwoofer Speaker
Rear Speaker (R)				Rear Speaker (L)

 Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).

M  If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set.

21