Seagate 7200.11 manual Nonoperating shock 1000 & 640 GB models, 320 & 160 GB models, Vibration

Page 20

2.8.5.2Nonoperating shock

1000 & 640 GB models

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

320 & 160 GB models

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

2.8.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.8.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

2–22 Hz	0.25 Gs (Limited displacement)

22–350 Hz	0.50 Gs

350–500 Hz	0.25 Gs

2.8.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

5–22 Hz	2.0	Gs (limited displacement)

22–350 Hz	5.0 Gs

350–500 Hz	2.0	Gs

14	Barracuda 7200.11 Serial ATA Product Manual, Rev. B

Image 20

Contents Barracuda 7200.11 Serial ATA Revision history Revision Date Sheets affected or commentsContents Barracuda 7200.11 Serial ATA Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 and 640 Gbyte models Will display the warranty information for your drive Drive specifications summary for 320 and 160 Gbyte models Barracuda 7200.11 Serial ATA Product Manual, Rev. B Default logical geometry LBA modeFormatted capacity Recording and interface technologyTypical seek times msec Read Write Physical characteristicsSeek time Power specifications Start/stop timesVoltage tolerance DC power requirementsConducted noise Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Nonoperating shock 1000 & 640 GB models 320 & 160 GB modelsVibration Operating vibrationAcoustics Electromagnetic immunityFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTsSafety certification ReliabilityAgency certification Electromagnetic compatibilityFCC verification Korean RRLAustralian C-Tick N176 China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions 1000 & 640 GB models Drive mountingMounting dimensions 320 & 160 GB models Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordWord Set Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsM.A.R.T. commands Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Page Barracuda 7200.11 Serial ATA Product Manual, Rev. B Page Disc Drive, Scotts Valley, California 95066-4544, USA