Seagate 7200-RPM, 5400-RPM manual Revision history, Revision Date Sheets affected or comments

Page 2

		Revision history
Revision	Date	Sheets affected or comments
Rev. A	09/15/10	Initial release.
Rev. B	10/25/10 fc, 2, 4-9, 13-14, 16 & 26-28.

© 2010 Seagate Technology LLC. All rights reserved. Publication number: 100627937, Rev. B, October 2010

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.

No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission.

One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Seagate reserves the right to change, without notice, product offerings or specifications.

Image 2

Contents Momentus Standard models Free-fall sensor modelsRevision history Revision Date Sheets affected or commentsContents Momentus Product Manual, Rev. B List of Figures Page Seagate Technology support services Seagate Online Support and ServicesIntroduction Standard models Free Fall Protection modelsAbout the Serial ATA interface Drive specifications for 750, 640 and 500 GB models Drive specificationsSpecification summary table Altitude, nonoperating Formatted capacity Default logical geometryLBA mode Physical organizationRecording and interface technology Physical characteristicsDrive specification Typical seek times Seek timeStart/stop times Typical seek times ms ReadPower specifications Typical current profile Conducted noise Voltage toleranceActive mode Power-management modesPower management modes Idle modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationElectromagnetic immunity Drive A-weighted Sound Power Levels SWL, BAAcoustics Test for Prominent Discrete Tones PDTsReliability Free Fall Protection featureSafety certification Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment China Restriction of Hazardous Substances RoHS DirectiveConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commandsIdentify Device command Word Description ValueXxxxH Fffeh Description if bit is set to Bit Set Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Momentus Product Manual, Rev. B Index ITE TPI Momentus Product Manual, Rev. B Page Seagate Technology LLC