Seagate ST3160815AS, ST3120215AS, ST3120815AS Barracuda 7200.10 Serial ATA Product Manual, Rev. K

Page 21

Drive specification

ST3250620AS

 

ST3250820AS

 

ST3250410AS

ST3250310AS

 

 

 

 

 

 

Vibration, operating

5–22 Hz: 0.25 Gs, Limited displacement

 

 

 

22–350 Hz: 0.50 Gs

 

 

 

 

 

350–500 Hz:: 0.25 Gs

 

 

 

 

Vibration, nonoperating

5–22 Hz: 0.25 Gs, Limited displacement

 

 

 

22–350 Hz: 5.0 Gs

 

 

 

 

 

350–500 Hz:: 1.0 Gs

 

 

 

 

 

 

 

 

 

 

 

Drive acoustics, sound power

 

 

 

 

 

 

Idle**

2.5 bels (typical)

 

 

2.6 bels (typical)

 

 

 

 

 

2.9 bels (max)

 

 

2.7 bels (max)

 

Performance seek

3.0 bels (typical)

 

 

 

 

 

3.2 bels (max)

 

 

 

 

Quiet seek

 

 

 

 

2.7 bels (typical)

 

 

 

 

 

 

2.8 bels (max)

 

 

 

 

 

 

 

Nonrecoverable read errors

1 per 1014 bits read

 

 

 

 

Annualized Failure Rate (AFR)

0.34%

 

 

 

 

 

 

 

 

 

Warranty

5 years on distribution units.

 

 

 

To determine the warranty for a specific drive, use a web browser to access the following

 

web page: www.seagate.com/support/service/

 

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the

 

drive serial number, model number (or part number) and country of purchase. The system

 

will display the warranty information for your drive.

 

 

 

 

 

Contact start-stop cycles

50,000 at 25°C, 50% rel. humidity

 

 

 

 

 

 

 

 

Supports Hotplug operation per the

Yes

 

 

 

 

Serial ATA Revision 2.5 specification

 

 

 

 

 

 

 

 

 

 

 

 

 

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Barracuda 7200.10 Serial ATA Product Manual, Rev. K

15

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Barracuda 7200.10 Serial ATA Revision Date Sheets affected or comments Evision historyContents Barracuda 7200.10 Serial ATA Product Manual, Rev. K List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specifications summary for 750 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 500 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 400 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 320 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 300 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 250 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 200 Gbyte mode To access the following web Drive specifications summary for the 160 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 120 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 80 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 40 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Recording and interface technology Model capacity 750 500 400 320 300Model capacity 160 120 Physical characteristics Start/stop times Seek timePower specifications Typical current profiles Conducted noiseVoltage tolerance Active mode Power-management modesIdle mode Sleep modeEnvironmental specifications 4 Disc models Nonoperating shock 2 Disc modelsVibration Operating vibrationFluid Dynamic Bearing FDB motor acoustics AcousticsTest for Prominent Discrete Tones PDTs Idle SeekElectromagnetic immunity Radio frequency environmentsTest Description Performance level Reference standard Reliability Safety certificationAgency certification Electromagnetic compatibilityKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentChina Restriction of Hazardous Substances RoHS Directive Barracuda 7200.10 Serial ATA Product Manual, Rev. K Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Barracuda 7200.10 Serial ATA Product Manual, Rev. K Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H 100 Bit Word Description if bit is set to Bit WordSet Features command values Set Features command3 S.M.A.R.T. commands M.A.R.T. commandsCode in features register A.R.T. command Internet Seagate Technology support servicesPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Page Barracuda 7200.10 Serial ATA Product Manual, Rev. K Page Disc Drive, Scotts Valley, California 95066-4544, USA
Related manuals
Manual 2 pages 3.83 Kb Manual 44 pages 8.48 Kb

ST3200820AS, ST3300820AS, ST3300620AS, ST3500641ASRK, ST3400820AS specifications

The Seagate ST3250310AS and ST3250410AS are notable hard drives that belong to the Barracuda series, known for their value and performance in the consumer and business sectors. These drives, featuring SATA interface technology, are especially popular among users seeking reliable storage solutions for desktops and personal computers.

The ST3250310AS model comes with a storage capacity of 250 GB, while the ST3250410AS offers an increased capacity of 400 GB. Both models are designed with a standard 3.5-inch form factor, making them compatible with most PC enclosures. The drives are equipped with a 7200 RPM rotational speed, which provides enhanced data access times and improved overall performance compared to slower drives.

One of the key features of these devices is their utilization of the SATA 3.0 interface, allowing for data transfer rates of up to 3 Gbps. This interface enhances the drive's performance when paired with compatible motherboards and systems. Additionally, the drives are equipped with a 16 MB buffer, which assists in improving the efficiency of the read and write operations, particularly during tasks that require frequent data access.

Seagate's Advanced Format technology is another characteristic of the ST3250310AS and ST3250410AS. This technology uses larger sector sizes, which allows for more efficient storage of data, resulting in increased capacity and potentially improved reliability. Furthermore, the drives come with a mean time between failures (MTBF) rating of about 1,000,000 hours, signifying their robust build quality designed for durability in varied computing environments.

The hard drives also leverage Seagate's SmartAlign technology, facilitating the drive's operation with Advanced Format hard drives seamlessly. The drives are compatible with various operating systems and are particularly suited for applications requiring high data availability and fast retrieval, such as gaming and media storage.

In summary, the Seagate ST3250310AS and ST3250410AS hard drives are solid options for users looking for dependable, high-performance storage solutions. Their blend of reliability, speed, and efficiency makes them suitable for a variety of applications, from personal computing to small business use. With their combination of advanced technologies and user-friendly characteristics, these drives stand out as capable choices for enhancing computer storage capabilities.
Top Page Image Contents