Seagate ST3160815AS, ST3120215AS, ST3120815AS, ST3160215AS manual Set Features command values

Page 59

4.3.2Set Features command

This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows:

Table 17: Set Features command values

02H

Enable write cache (default).

03H

Set transfer mode (based on value in Sector Count register).

 

Sector Count register values:

 

00H

Set PIO mode to default (PIO mode 2).

 

01H

Set PIO mode to default and disable IORDY (PIO mode 2).

 

08H

PIO mode 0

 

09H

PIO mode 1

 

0AH

PIO mode 2

 

0BH

PIO mode 3

 

0CH

PIO mode 4 (default)

 

20H

Multiword DMA mode 0

 

21H

Multiword DMA mode 1

 

22H

Multiword DMA mode 2

 

40H

Ultra DMA mode 0

 

41H

Ultra DMA mode 1

 

42H

Ultra DMA mode 2

 

43H

Ultra DMA mode 3

 

44H

Ultra DMA mode 4

 

45H

Ultra DMA mode 5

 

46H

Ultra DMA mode 6

10H

Enable use of SATA features

55H

Disable read look-ahead (read cache) feature.

82H

Disable write cache

90H

Disable use of SATA features

AAH

Enable read look-ahead (read cache) feature (default).

F1H

Report full capacity available

Note. At power-on, or after a hardware or software reset, the default values of the features are as indi- cated above.

Barracuda 7200.10 Serial ATA Product Manual, Rev. K

53

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Barracuda 7200.10 Serial ATA Revision Date Sheets affected or comments Evision historyContents Barracuda 7200.10 Serial ATA Product Manual, Rev. K List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specifications summary for 750 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 500 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 400 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 320 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 300 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 250 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 200 Gbyte mode To access the following web Drive specifications summary for the 160 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 120 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 80 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 40 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityModel capacity 160 120 Recording and interface technologyModel capacity 750 500 400 320 300 Physical characteristics Start/stop times Seek timePower specifications Voltage tolerance Typical current profilesConducted noise Sleep mode Power-management modesActive mode Idle modeEnvironmental specifications Operating vibration Nonoperating shock 2 Disc models4 Disc models VibrationIdle Seek AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTsTest Description Performance level Reference standard Electromagnetic immunityRadio frequency environments Electromagnetic compatibility Safety certificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment Barracuda 7200.10 Serial ATA Product Manual, Rev. K Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Barracuda 7200.10 Serial ATA Product Manual, Rev. K Hot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Word Description Value Identify Device commandXx07H 100 Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsM.A.R.T. commands Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Page Barracuda 7200.10 Serial ATA Product Manual, Rev. K Page Disc Drive, Scotts Valley, California 95066-4544, USA
Related manuals
Manual 2 pages 3.83 Kb Manual 44 pages 8.48 Kb

ST3200820AS, ST3300820AS, ST3300620AS, ST3500641ASRK, ST3400820AS specifications

The Seagate ST3250310AS and ST3250410AS are notable hard drives that belong to the Barracuda series, known for their value and performance in the consumer and business sectors. These drives, featuring SATA interface technology, are especially popular among users seeking reliable storage solutions for desktops and personal computers.

The ST3250310AS model comes with a storage capacity of 250 GB, while the ST3250410AS offers an increased capacity of 400 GB. Both models are designed with a standard 3.5-inch form factor, making them compatible with most PC enclosures. The drives are equipped with a 7200 RPM rotational speed, which provides enhanced data access times and improved overall performance compared to slower drives.

One of the key features of these devices is their utilization of the SATA 3.0 interface, allowing for data transfer rates of up to 3 Gbps. This interface enhances the drive's performance when paired with compatible motherboards and systems. Additionally, the drives are equipped with a 16 MB buffer, which assists in improving the efficiency of the read and write operations, particularly during tasks that require frequent data access.

Seagate's Advanced Format technology is another characteristic of the ST3250310AS and ST3250410AS. This technology uses larger sector sizes, which allows for more efficient storage of data, resulting in increased capacity and potentially improved reliability. Furthermore, the drives come with a mean time between failures (MTBF) rating of about 1,000,000 hours, signifying their robust build quality designed for durability in varied computing environments.

The hard drives also leverage Seagate's SmartAlign technology, facilitating the drive's operation with Advanced Format hard drives seamlessly. The drives are compatible with various operating systems and are particularly suited for applications requiring high data availability and fast retrieval, such as gaming and media storage.

In summary, the Seagate ST3250310AS and ST3250410AS hard drives are solid options for users looking for dependable, high-performance storage solutions. Their blend of reliability, speed, and efficiency makes them suitable for a variety of applications, from personal computing to small business use. With their combination of advanced technologies and user-friendly characteristics, these drives stand out as capable choices for enhancing computer storage capabilities.
Top Page Image Contents