Seagate ST3250820AS, ST3120215AS, ST3120815AS Korean RRL, Australian C-Tick N176, FCC verification

Page 44

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•Family name: Barracuda 7200.10

•Certificate number: STX-L3510 (B)

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.13.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursu- ant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interfer- ence to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

•Reorient the receiving antenna.

•Move the device to one side or the other of the radio or TV.

•Move the device farther away from the radio or TV.

•Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, you should consult your dealer or an experienced radio/television technician for additional sug- gestions. You may find helpful the following booklet prepared by the Federal Communications Commission: How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Super- intendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication num- ber 004-000-00345-4.

38

Barracuda 7200.10 Serial ATA Product Manual, Rev. K

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Barracuda 7200.10 Serial ATA Evision history Revision Date Sheets affected or commentsContents Barracuda 7200.10 Serial ATA Product Manual, Rev. K List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 750 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 500 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 400 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 320 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 300 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for 250 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 200 Gbyte mode To access the following web Drive specifications summary for the 160 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 120 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 80 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Drive specifications summary for the 40 Gbyte models Barracuda 7200.10 Serial ATA Product Manual, Rev. K Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Model capacity 160 120 Recording and interface technologyModel capacity 750 500 400 320 300 Physical characteristics Seek time Start/stop timesPower specifications Voltage tolerance Typical current profilesConducted noise Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Nonoperating shock 2 Disc models 4 Disc modelsVibration Operating vibrationAcoustics Fluid Dynamic Bearing FDB motor acousticsTest for Prominent Discrete Tones PDTs Idle SeekTest Description Performance level Reference standard Electromagnetic immunityRadio frequency environments Safety certification ReliabilityAgency certification Electromagnetic compatibilityFCC verification Korean RRLAustralian C-Tick N176 China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment Barracuda 7200.10 Serial ATA Product Manual, Rev. K Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsDrive mounting Barracuda 7200.10 Serial ATA Product Manual, Rev. K Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Identify Device command Word Description ValueXx07H 100 Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsM.A.R.T. commands Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Page Barracuda 7200.10 Serial ATA Product Manual, Rev. K Page Disc Drive, Scotts Valley, California 95066-4544, USA
Related manuals
Manual 2 pages 3.83 Kb Manual 44 pages 8.48 Kb

ST3200820AS, ST3300820AS, ST3300620AS, ST3500641ASRK, ST3400820AS specifications

The Seagate ST3250310AS and ST3250410AS are notable hard drives that belong to the Barracuda series, known for their value and performance in the consumer and business sectors. These drives, featuring SATA interface technology, are especially popular among users seeking reliable storage solutions for desktops and personal computers.

The ST3250310AS model comes with a storage capacity of 250 GB, while the ST3250410AS offers an increased capacity of 400 GB. Both models are designed with a standard 3.5-inch form factor, making them compatible with most PC enclosures. The drives are equipped with a 7200 RPM rotational speed, which provides enhanced data access times and improved overall performance compared to slower drives.

One of the key features of these devices is their utilization of the SATA 3.0 interface, allowing for data transfer rates of up to 3 Gbps. This interface enhances the drive's performance when paired with compatible motherboards and systems. Additionally, the drives are equipped with a 16 MB buffer, which assists in improving the efficiency of the read and write operations, particularly during tasks that require frequent data access.

Seagate's Advanced Format technology is another characteristic of the ST3250310AS and ST3250410AS. This technology uses larger sector sizes, which allows for more efficient storage of data, resulting in increased capacity and potentially improved reliability. Furthermore, the drives come with a mean time between failures (MTBF) rating of about 1,000,000 hours, signifying their robust build quality designed for durability in varied computing environments.

The hard drives also leverage Seagate's SmartAlign technology, facilitating the drive's operation with Advanced Format hard drives seamlessly. The drives are compatible with various operating systems and are particularly suited for applications requiring high data availability and fast retrieval, such as gaming and media storage.

In summary, the Seagate ST3250310AS and ST3250410AS hard drives are solid options for users looking for dependable, high-performance storage solutions. Their blend of reliability, speed, and efficiency makes them suitable for a variety of applications, from personal computing to small business use. With their combination of advanced technologies and user-friendly characteristics, these drives stand out as capable choices for enhancing computer storage capabilities.
Top Page Image Contents