10.0Interface requirements
This section partially describes the interface requirements as implemented on the drives.
10.1General description
This section describes in essentially general terms the interface requirements supported by the Cheetah 15K.5 SCSI. No attempt is made to describe all of the minute details of conditions and constraints that must be con- sidered by designers when designing a system in which this family of drives can properly operate. Seagate declares that the drives operate in accordance with the appropriate ANSI Standards referenced in various places herein, with exceptions as noted herein or in the Seagate Parallel SCSI InterfaceManual and the SCSI Commands Reference Manual.
10.2SCSI interface messages supported
Table 7 lists the messages supported by the Cheetah 15K.5 SCSI family drives.
Table 7: SCSI messages supported by Cheetah 15K.5 SCSI family drives
|
| Supported |
|
| (Y = yes) |
Message name | Message code | (N = no) |
Abort | 06h | Y |
0Dh | Y | |
Bus device reset | 0Ch | Y |
Clear ACA | 16h | N |
Clear queue | 0Eh | Y |
Command complete | 00h | Y |
Continue I/O process | 12h | N |
Disconnect | 04h | Y |
Extended messages | 01h[1] | Y |
Identify | Y | |
Ignore wide residue (two bytes) | 23h | Y |
Initiate recovery | 0Fh | N |
Initiator detected error | 05h | Y |
Linked command complete | 0Ah | Y |
Linked command complete with flag | 0Bh | Y |
Message parity error | 09h | Y |
Message reject | 07h | Y |
Modify data pointer | [1] | N |
No operation | 08h | Y |
Parallel Protocol Request | [1] [2] | Y |
Queue tag messages (two bytes) |
|
|
ACA | 24h | N |
Head of queue tag | 21h | Y |
Cheetah 15K.5 SCSI Product Manual, Rev. J | 45 |