Seagate ST760211DE Configuring and mounting the drive, Handling and static discharge precautions

Page 25

3.0Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

• Do not cover or seal the breather hole! Covering or sealing the breather hole may result in loss of data.

Figure 5. Lyrion Series breather hole location

•Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s exposure to ESD.

•Before handling the drives, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

•Handle the drive only by its edges or frame.

Figure 6. Lyrion Series proper handling example

•The drive is fragile—handle it with care. Do not press down on the drive top cover or attempt to use a pen to write on the drive’s label.

•Do not apply more than 6.8N of force to the top cover.

•Always rest the drives on a padded, antistatic surface until you mount it in the system.

Lyrion Series IDE Product Manual, Rev. E

19

Image 25

Contents ST760211DE ST730212DE Lyrion Series IDERevision Date Revision historyContents Lyrion Series IDE Product Manual, Rev. E List of Figures Lyrion Series IDE Product Manual, Rev. E Lyrion Series IDE interface disc drive IntroductionDrive care DisclaimerSpecifications Drive specificationsDrive specification ST760211DE ST730212DE OverviewLBA mode addressing Default logical geometryFormatted capacity Model Cylinders Heads SectorsTechnology Specification Physical characteristicsRecording and interface technology Time to readyPower specifications Power Consumption at Average W DC powerTypical current profile Voltage tolerance Voltage tolerance including noise Conducted noiseActive mode Power-management modesStandby/Sleep mode Power modes Heads Spindle BufferEnvironmental specifications Operating shock ShockNonoperating shock VibrationOperating random vibration Operating sweep sine vibrationOperating random vibration profile Nonoperating sweep sine vibrationNonoperating random vibration profile Nonoperating random vibrationCorrosive environment Electromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityReliability Measurement type SpecificationAgency certification Safety certificationElectromagnetic compatibility Korean RRLFCC verification China Restriction of Hazardous Substances RoHS DirectivePage Handling and static discharge precautions Configuring and mounting the drivePage Lyrion Series mechanical dimensions-top, side and end view Drive installationMounting considerations Lyrion Series FPC dimensionsWay ZIF IDE interface connector signals Connector interface signals and connector pinsInterface description Iordy Supported commands Supported ATA commandsCommand Name Command Op-Code Command Type Supported commands Word ATA specification Value Identify Device commandLyrion Series IDE Product Manual, Rev. E Features register values Set Features commandFeature Description Lyrion Series IDE Product Manual, Rev. E Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Publication feedback survey Lyrion Series IDE Product Manual, Rev. E Index Page Page Seagate Technology LLC

Related manuals

Manual 46 pages 46.03 Kb