Samsung 20041112184341515 instruction manual Troubleshooting, To set up Sleep

Sleep Function

Troubleshooting

Problem Check

GB

To set up Sleep

Press the Sleep button.

•Each time the button is pressed the selection toggles as follows: SLEEP 10 ➔ SLEEP 20

➔SLEEP 30 ➔ SLEEP 60 ➔ SLEEP 90

➔SLEEP 120 ➔ SLEEP 150 ➔ OFF.

Sleep

What is the

Sleep function?

You can set the sleep time so that the unit powers off automatically after a preset period of time.

GB

•Is the disc installed with the label side facing up?

The disc tray does not	• Is the power cord plugged securely into the power outlet?
open.
	• Turn off the power to the unit by pressing the Power (	) button
	and turn it back on.

	• Check the region number of the DVD.
Disc does not play.	• DVD discs purchased abroad may not be playable.
	• This player cannot play CD-ROMs, DVD-ROMs, etc.
	• Check the rating level of the DVD.

To Review Sleep Setting

•The remaining time for the selected Sleep time is displayed.

•Pressing the button once again changes the Sleep time from the last setting.

Playback does not start	• Check whether the disc has any scratch marks or is deformed.
immediately when the
Play/Pause button is pressed.
	• No sound is heard during high-speed playback, slow playback,
	and step motion playback modes.
No sound is produced.	• Are the speakers properly connected? Is the speaker Setup
	correctly customized?
	• Is the disc severely damaged?
	The disc may be dirty. Wipe off fingerprints or dirt.
Sound can be heard only	• When listening to a CD or radio, sound is output to the front
from a few speakers and	speakers only (L/R). Select the “PRO LOGIC” option by pressing
not all six.	the Pro Logic button on the remote control unit to use all six
	speakers.
	• Check whether your DVD disc is 5.1 CH compatible.
Picture does not appear; sound	• Was the player moved suddenly from a cold place to a warm one?
is not produced; the disc tray	When condensation forms inside the player, remove the disc
	and let the player stand for 1 or 2 hours with the power on.
opens 2-5 seconds later.
	(You can use the player after the condensation disappears.)
Sound quality is	• Are the speaker cables loose?
irregular.	• Is there any dirt or debris at the end of the speaker connector?
Dolby Digital 5.1 Channel	• Does the disc being played show the “Dolby Digital 5.1CH” mark ?
Surround Sound is not	5.1-channel sound is reproduced only if the disc is recorded with
being reproduced.	5.1 channel sound.
	• Is the DVD player connected to the proper speakers?

39 40