Williams Sound specifications Two Channel Infrared Modulator Model MOD, MOD 232 Rear Panel

Two Channel Infrared Modulator • Model MOD 232

Two Channel Infrared Modulator • Model MOD 232

D

MOD 232 Rear Panel:	Input CH A Input CH B			Audio Line		MOD 232 Infrared System Modulator
		CH A	1 2 3 4 5 6 7 8	Output		Williams Sound
						Baseband
				CH A	Input	Output Output
		CH B	1 2 3 4 5 6 7 8			Power In
						24 VAC, 15 VA, 50-60 Hz

Configuration	CH B	Plug
Switches
Made in USA	100 Ohms	50 Ohms
		24V

Power Input:	3-Pin Molex, 24 VAC, 50-60 Hz, 15 VA
Audio Input Jack:	CHA and CHB combination XLR/TRS jack
Mic Level:	Balanced, Lo-Z, 100 µV min. to 90 mV max., 1 mV nominal, 3kΩ input impedance, sup-
	plies switchable simplex power per DIN 45596 for condenser mics
Line Level:	Balanced or unbalanced, 21 mV min. to 10V max., 212 mV nominal, 100 kΩ
Audio Line Output Jacks:	RCA Jack, CHA and CHB, 500 mV, unbalanced, 100 Ω source impedance, load imped-
	ance must be greater than1 kΩ
Configuration Switches:	CHA and CHB 8-position DIP switch, selects Mic/Line input, compressor gain, simplex
	power, discrete or mixed inputs, carrier frequency, channel disable, auto shut-off timer
Baseband Input Jack:	BNC, allows mixing with additional MOD 232 Modulator (4CH operation), 100 mV, 50

Ωinput impedance, use with MOD 232 or MOD 112 (111), BNC, RG-58 Cable

Baseband Output Jack:	Two BNC jacks carry baseband signal, 100 mV/channel, 50 Ω source impedance, for use
	with WIR TX9 or MOD 232 only
Approvals:	CE, FCC, RoHS, WEEE
Operating Requirements:	0-50º C ambient temperature, non-condensing, non-corrosive atmosphere
Warranty:	5 years on modulator*

*90 days on accessories.

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

©2007, Williams Sound Corp. MCAT 002B 2