13. General Information
■Copy memory capacity:
Approx. 10 pages (Based on the
*1 Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other party’s machine.
*2 Transmission speed is based upon the
*3 If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will be retained in memory.
*4 Recording time may be reduced by the calling party’s background noise.
Note:
LDesign and specifications are subject to change
without notice.
LThe pictures and illustrations in these instructions may vary slightly from the actual product.
Recording paper specifications
Recording paper size:
A4: 210 mm ⋅ 297 mm
Recording paper weight:
64 g/m2 to 80 g/m2
Note for recording paper:
LDo not use the following types of paper:
–Paper with a cotton and/or fibre content that is over 20 %, such as letterhead paper or paper used for resumes
–Extremely smooth or shiny paper, or paper that is highly textured
–Coated, damaged or wrinkled paper
–Paper with foreign objects attached, such as tabs or staples
–Paper which has dust, lint or oil stains
–Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200 °C, such as
vellum paper. These materials may transfer onto the fusing roller and cause damage.
–Moist paper
LSome paper only accepts print on one side. Try using the other side of the paper if you are not happy with
the print quality or if misfeeding occurs.
LFor proper paper feeding and best print quality, we recommend using
LDo not use paper of different types or thickness at the same time. This may cause a paper jam.
LAvoid
LDo not use paper printed from this unit for double- sided printing with other copiers or printers. This may
cause a paper jam.
LTo avoid curling, do not open paper packs until you are ready to use the paper. Store unused paper in the original packaging, in a cool and dry location.
13.2.2 Cordless handset
■Standard:
DECT (Digital Enhanced Cordless Telecommunications) GAP (Generic Access Profile)
■Number of channels: 120 Duplex Channels
■Frequency range: 1.88 GHz to 1.9 GHz
■Duplex procedure:
TDMA (Time Division Multiple Access)
■Channel spacing: 1,728 kHz
■Bit rate:
1,152 kbit/s
■Modulation:
GFSK (Gaussian Frequency Shift Keying)
■RF transmission power: Approx. 250 mW
■Voice coding:
ADPCM 32 kbit/s
■Operating environment:
5 °C – 40 °C, 20 % – 80 % RH (Relative Humidity)
■Dimensions:
Approx. height 155 mm ⋅ width 48 mm ⋅ depth 34 mm
■Mass (Weight): Approx. 140 g
75
