11. Help
Display | Cause & Solution |
“MODEM ERROR” | L There is something wrong with the unit’s modem. Contact our service |
| personnel. |
“NO FAX REPLY” | L The other party’s fax machine is busy or has run out of recording paper. Try |
| again. |
“OPEN CABINET | L Please use genuine Panasonic replacement film (page 7). |
CHECK FILM SLACK” | L The ink film is slack. Tighten it (see step 5 on page 11). |
“OPEN CABINET | L The fax machine is positioned near appliances such as TVs or speakers |
CHECK FILM TYPE” | which generate an intense magnetic field. |
“PAPER JAMMED” | L A recording paper jam occurred. Remove the jammed paper (page 70). |
| L You forced the recording paper into the paper tray too strongly. Remove all |
| of the installed paper, and |
|
|
“PLEASE WAIT” | L The unit is checking that there is no slack or crease in the ink film. Wait for |
| a moment while the check is completed. |
“POLLING ERROR” | L The other party’s fax machine does not support polling. Check with the |
| other party. |
“RECORDING ERROR” | L The greeting message you recorded was under 1 second long. Record a |
| longer message. |
“REDIAL TIME OUT” | L The other party’s fax machine is busy or has run out of recording paper. Try |
| again. |
“REMOVE DOCUMENT” | L The document is jammed. Remove the jammed document (page 71). |
| L Press {STOP} to eject the jammed paper. |
“SERIAL ERROR” | L There is something wrong with the unit. Contact our service personnel. |
“TRANSMIT ERROR” | L A transmission error occurred. Try again. |
| L If you send a fax overseas, try the following: |
| – Use the overseas transmission mode (feature #23 on page 46). |
| – Add 2 pauses at the end of the telephone number or dial manually. |
|
|
“UNIT OVERHEATED” | L The unit is too hot. Stop using the unit for a while and let the unit cool down. |
|
|
11.2.2 Cordless handset
Display | Cause & Solution |
“Answer Sys. Full” | L Erase unnecessary messages (page 41, 42). |
“Error” | L Recording was too short. Try again. |
“Failed” | L Phonebook copy failed. Confirm the destination unit is in standby mode and |
| try again. |
“Incomplete” | L The destination unit’s phonebook memory is full. Erase the unnecessary |
| phonebook items from the destination unit and try again. |
“Invalid Number” | L You tried to send an SMS message to a phone number saved in the base |
| unit phonebook, cordless handset phonebook, Caller ID list, or redial list |
| that is over 20 digits long. |
|
|
“Memory Full” | L The cordless handset’s phonebook memory is full. Erase unnecessary |
| items (page 21). |
| L There is no room left in memory to record voice messages. Erase |
| unnecessary messages (page 41, 42). |
|
|
“SMS Full” | L Erase unnecessary messages (page 27). |
62