Panasonic KX-FC228HK operating instructions Programmable Features, 1 “ON”, MENU i#25

		8. Programmable Features
Feature	Feature code	Selection
Sending a fax at a	{#}{2}{5}	This feature allows you to take advantage of low-cost calling
specified time		hours offered by your telephone company. This feature can be set
		up to 24 hours in advance of the desired time.
		{0} “OFF” (default)
		{1} “ON”
		To send a document:
		1. Insert the document.
		2. If necessary, press {A} or {B} repeatedly to select the
		desired resolution (page 29).
		3. {MENU} i{#}{2}{5}
		4. Press {1} to select “ON”. i{SET}
		5. Enter the fax number. i{SET}
		6. Enter the transmission start time.
		L If you select 12-hour time entry (page 17), press {*}
		repeatedly to select AM or PM.
		L If you select 24-hour time entry (page 17), the time is set
		using 24-hour time entry.
		7. {SET} i{MENU}
		Note:
		L To cancel after programming, press {STOP} then {SET}.
Setting the Caller ID list	{#}{2}{6}	{0} “OFF” (default): The Caller ID list will not be printed
to print automatically		automatically, but the base unit will keep a record of the
		information for the last 50 callers.
		{1} “ON”: The Caller ID list will be printed automatically each time
		the base unit logs 50 callers (page 23).
Activating the	{#}{3}{1}	{0} “OFF” (default)
Distinctive Ring feature		{1} “ON”
		See page 37 for details.
Setting the quick scan	{#}{3}{4}	This feature is helpful when you want to remove the document for
		other uses, because the unit will release the document before
		sending or copying.
		{0} “OFF” (default): Deactivates this feature.
		{1} “ON”: The unit will scan the document and store it into
		memory first, then the unit will start sending or copying the
		documents.
		Note:
		L If the document exceeds the memory capacity, sending of the
		whole document or copying of the exceeded document will be
		cancelled and this feature will be turned OFF automatically.

47