2. Preparation
2.4Adjusting cordless handset volume
{j/OK}
{^}{V}{>}{ih}
Ringer volume
1.{j/OK}
2.Press {^} or {V} to select “Handset Setup”. i
{>}
3.Press {^} or {V} to select “Ringer Setup”. i
{>}
4.Press {^} or {V} to select “Ringer Volume”. i
{>}
5.Press {^} or {V} to select the desired volume. i
{>} i{ih}
Note:
LWhen receiving a call, you can adjust the ringer volume by pressing {^} or {V}.
LWhen the ringer is turned OFF, the cordless handset will ring for alarm and intercom calls.
Ringtone
You can select the desired cordless handset ringtone for outside calls and intercom calls (page 52).
Cordless handset receiver volume While using the receiver, press {^} or {V}.
Speaker volume
While using the speakerphone, press {^} or {V}.
2.5 Adjusting base unit volume
{SET}
{A}{B}
Ringer volume
While the unit is idle, press {A} or {B}.
LIf there are any documents in the document entrance, you cannot adjust the volume. Confirm that there are no documents in the entrance.
To turn the ringer OFF
Press {B} repeatedly to display “RINGER OFF= OK?”.
i{SET}
LThe base unit will not ring for outside calls.
The base unit will ring at the low level for intercom calls.
LTo turn the ringer back ON, press {A}.
Ringtone
LYou can select the desired base unit ringtone for outside calls (feature #17 on page 46).
Speaker volume
While using the speakerphone, press {A} or {B}.
16