8. Programmable Features
8.2.2 Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or daily. Set the date and time beforehand (page 17).
1.{j/OK} i“Handset Setup” i{>}
2.“Time Settings” i{>}
3.“Alarm” i{>} 2 times
4.Select an alarm mode. i{>}
“Off” | Turns alarm OFF. Press {>} again, |
| then press {ih} to finish. |
|
|
“Once” | The alarm sounds once at the set time. |
| Enter the desired day and month. |
“Daily” | An alarm sounds daily at the set time. |
5.Enter the desired hour and minute. i{j/OK}
6.Select the desired ringtone. i{>}
7.“Save” i{>} i{ih}
Note:
LTo stop the alarm, press any dial key.
LWhen in talk or intercom mode, the alarm will not sound until the call has ended.
LIf you select “Once”, the setting will change to “Off” after the alarm sounds.
3.“Call Restrict” i{>}
4.Enter “0000” (default base unit PIN).
LIf you forget your PIN, contact our service personnel.
5.To restrict the base unit, press {0}.
To restrict a cordless handset, press the desired cordless handset number.
LAll the registered cordless handset numbers will
be displayed.
LFlashing numbers indicate call restriction is turned ON for the corresponding cordless
handset/base unit.
LTo turn call restriction OFF for a cordless handset/base unit, press the number again. The number will stop flashing.
6.{j/OK}
7.Select a memory location. i{>}
8.Enter the phone number or area code to be restricted (up to 8 digits). i{j/OK} i{ih}
LTo erase a restricted number, press {C/T}.
8.2.3 Display setup
Display language
1.{j/OK} i“Handset Setup” i{>}
2.“Display Setup” i{>}
3.“Select Language” i{>}
4.Select the desired language. i{>} i{ih}
Note:
LIf you select a language you cannot read, press {ih}, press {j/OK}, press {^} 3 times, press {>}, press {V} 2 times, press {>}, press {V}, press {>}, select the desired language, press {>}, then press {ih}.
8.2.4 Call options
Setting call restriction
You can restrict selected cordless handsets/base unit from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which cordless handsets/base unit will be restricted. Storing area codes here will prevent the restricted cordless handsets/base unit from dialling any phone number in that area code.
1.{j/OK} i“Base Unit Setup” i{>}
2.“Call Options” i{>}
54
