8. Programmable Features

Feature

Feature code

Selection

Changing the maximum

{#}{1}{0}

{1} 1 MINUTE

recording time for

 

{2} GREETING ONLY: The unit plays the greeting message but

incoming messages*1

 

does not record any incoming messages.

 

 

{3} 3 MINUTES(default)

 

 

Note:

 

 

L You can also program this feature with the cordless handset

 

 

(page 43).

 

 

 

Setting the remote

{#}{1}{1}

1. {MENU} i{#}{1}{1}

operation ID*1

 

2. To activate the remote operation feature, enter a 3-digit

 

 

 

 

remote operation ID.

 

 

L To deactivate the remote operation feature, press {*}.

 

 

3. {SET} i{MENU}

 

 

Note:

 

 

L You can also program this feature with the cordless handset

 

 

(page 43).

 

 

 

Setting the dialling

{#}{1}{3}

If you cannot make calls, change this setting according to your

mode (for the base unit

 

telephone line service.

and cordless handset)

 

{1} PULSE: For rotary pulse dial service.

 

 

{2} TONE(default): For tone dial service.

Setting the ringtone for

{#}{1}{7}

{1} RINGTONE 1(default)

outside calls*2

 

{2} RINGTONE 2

 

 

{3} RINGTONE 3

 

 

{4} RINGTONE 4

 

 

{5} RINGTONE 5

 

 

{6} RINGTONE 6

*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and vice versa.

*2 This setting can be changed individually for the base unit and the cordless handset.

To set the cordless handset ringtone for outside calls, see page 52.

8.1.2Advanced features

Feature

Feature code

Selection

Setting the journal

{#}{2}{2}

{0} OFF: The unit will not print a journal report, but will keep a

report to print

 

record of the last 30 fax transmissions and receptions.

automatically

 

{1} ON(default): The unit will print a journal report automatically

 

 

after every 30 new fax transmissions and receptions (page 29).

Sending documents

{#}{2}{3}

If you cannot send a fax overseas even if the number is correct

overseas

 

and the line is connected, activate this feature before sending the

 

 

fax.

 

 

This feature improves the reliability by reducing the transmission

 

 

speed.

 

 

{0} OFF: Deactivates this feature.

 

 

{1} NEXT FAX: This setting is effective only for the next

 

 

attempted fax transmission. After transmission, the unit will return

 

 

to the previous setting.

 

 

{2} ERROR(default): When the previous fax transmission fails

 

 

and you wish to re-send the document.

 

 

Note:

 

 

L Calling charges may be higher than usual.

 

 

 

46

Page 46
Image 46
Panasonic KX-FC228HK operating instructions Advanced features