Panasonic KX-FC228HK Feature Feature code Selection Setting recall flash #72, 400msec. default

8. Programmable Features

Feature	Feature code	Selection
Setting recall (flash)	{#}{7}{2}	The flash time depends on your telephone exchange or host PBX.
time (for the base unit		{1} “900msec.”
and cordless handset)		{2} “700msec.”
		{3} “600msec.”
		{4} “400msec.” (default)
		{5} “300msec.”
		{6} “250msec.”
		{7} “200msec.”
		{8} “160msec.”
		{9} “110msec.”
		{*} “100msec.”
		{0} “90msec.”
		{#} “80msec.”
		Note:
		L If the unit is connected via a PBX, this setting may need to be
		changed in order for PBX functions (transferring a call, etc.) to
		work correctly. Consult your PBX supplier for the correct
		setting.
Changing the receiving	{#}{7}{3}	{1} “TEL” (default): Telephone mode (page 33)
mode in the manual		{2} “TEL/FAX”: Telephone/Fax mode (page 34)
answer setting
Setting the connecting	{#}{7}{6}	If you often have trouble when sending faxes, this feature allows
tone		you to hear connecting tones: fax tone, ring back tone and busy
		tone. You can use those tones to confirm the status of the other
		party’s machine.
		{0} “OFF”: Deactivates this feature.
		{1} “ON” (default): You will hear connecting tones.
		Note:
		L If the ring back tone continues, the other party’s machine may
		not be a fax machine or may have run out of paper. Check with
		the other party.
		L The connecting tone volume cannot be adjusted.
Changing the receiving	{#}{7}{7}	{1} “TAM/FAX” (default): Telephone Answering Machine/Fax
mode in the AUTO		mode (page 35)
ANSWER setting		{2} “FAX ONLY”: Fax only mode (page 35)
Changing the TEL/FAX	{#}{7}{8}	If you use an extension telephone when this unit is in TEL/FAX
delayed ring count		mode, select the desired number of times the extension
		telephone rings before the unit answers the call.
		{1} “1”
		{2} “2” (default)
		{3} “3”
		{4} “4”
		{5} “5”
		{6} “6”
		{7} “7”
		{8} “8”
		{9} “9”
		See page 34 for details.

50