Panasonic KX-FC228HK operating instructions Sending a fax manually, 2. “Fax Start”

4. Fax

4.1 Sending a fax manually

1

{A}{B}

{SP-PHONE} {STOP}

{FAX START} {REDIAL}

1Adjust the width of the document guides (1) to fit the actual size of the document.

2Insert the document (up to 10 pages) FACE DOWN until a single beep is heard and the unit grasps the document.

3If necessary, press {A} or {B} repeatedly to select the desired resolution. i{SP-PHONE}

4Dial the fax number.

5When a fax tone is heard: Press {FAX START}.

When the other party answers your call:

Ask them to press their start button. When the fax tone is heard, press {FAX START}.

To select the resolution

Select the desired resolution according to the character size.

–“STANDARD”: For normal-sized characters.

–“FINE”: For small-sized characters.

–“SUPER FINE”: For very small-sized characters.

–“PHOTO”: For photographs, shaded drawings, etc.

LUsing the “FINE”, “SUPER FINE” and “PHOTO” settings will increase transmission time.

To redial the last number

{REDIAL} i{FAX START}

LIf the line is busy, the unit will automatically redial the number 2 or more times.

LTo cancel redialling, press {STOP}.

To send more than 10 pages at a time

Insert the first 10 pages of the document. Add the other pages (up to 10 at a time) on top of the previously inserted pages while the last page is being fed into the unit.

Pre-dialling a fax number

1.Enter the fax number.

2.Insert the document.

3.{FAX START}

Sending from memory (Quick scan feature)

To use this feature, activate feature #34 (page 47) beforehand.

1.Insert the document.

2.Enter the fax number. i{FAX START}

LIf the document exceeds the memory capacity,

transmission will be cancelled and this feature will be turned OFF automatically. You must send the entire document manually.

LThis feature cannot be used if {SP-PHONE}on the base unit, or {C} or {s} on the cordless handset is pressed.

To stop sending

Press {STOP}.

To send a fax using the cordless handset

1.While talking to the other party, insert the document, then press {j/OK}.

2.“Fax Start” i{>}

3.Press {ih} or place the cordless handset on the base unit.

Printing a sending report

A sending report provides you with a printed record of transmission results (errors, etc.). To print sending reports, make sure feature #04 is activated (page 45). The default setting is “ERROR”. For an explanation of error messages, see page 60.

Printing a journal report

A journal report provides you with a printed record of the 30 most recent fax transmissions and receptions. To print it manually, see page 74. To print it automatically after every 30 new fax transmissions and receptions, make sure feature #22 is activated (page 46). For an explanation of error messages, see page 60.

29