US CA
36
User preference settings
How to change the language
Your oven is preset to use DCS’s CONV (for ‘convection’) terminology. This is listed in the languages as LANG DCS. However, you may choose to use an alternative, AERO terminology. This is listed in the other languages as LANG USA. To select it, refer to the instructions on how to change the language below. Note that once you have changed terminologies, all references to CONV in the user guide should be understood as being equivalent to AERO.
1Enter the USER SELECT mode and turn the oven mode knob clockwise until LANG DCS appears in its display.
2 Press | PUSH TO | to toggle through the different languages: LANG DCS for CONV terminology, |
CLEAR |
LANG USA for AERO terminology, LANG UK ENG for UK English, LANGUE FRANCE for Canadian French or LANG ESPANO for American Spanish.
3Press the CLOCK button to activate.
4Turn the oven mode knob back to OFF.
How to reset the oven
This will reset the TEMP (temperature) SCALE, SHORT ALERT, TIME MODE and SHOW CLOCK to their default settings. SABBATH mode and language settings will remain unaffected.
1Enter the USER SELECT mode and turn the oven mode knob clockwise until RESET appears in its display.
2 Press | PUSH TO | to reset the oven to default settings. |
CLEAR |
3Press the CLOCK button to exit USER SELECT mode.
4Turn the oven mode knob back to OFF.
How to lock the control panel
Locking the control panel disables all the buttons and knobs, which can be useful when cleaning oven surfaces or preventing accidental bumps and unauthorized use. The control panel can only be locked when the oven mode and temperature are both OFF.
To lock the control panel
Press the PUSH TO 
button and hold down for five seconds. The LOCK symbol will appear in
CLEAR
the clock display. Repeat to unlock.
