Troubleshooting
Fault codes
37
US CA
If there is a fault, the oven will beep every second, and a fault code will appear in the clock display as a letter ‘F’ with a number after it.
Important!
Do not turn off the main power supply to the oven if you get a fault code. The fans are needed to cool the oven.
For safety, this oven is designed to
If you get a fault code:
1Note the fault code.
2Turn the temperature and oven mode knobs to OFF.
3 | Press the | PUSH TO | button. The oven may have already |
CLEAR | |||
| enough to clear the fault. | ||
4 | Call your DCS Authorized Service Center with the fault code information. | ||
Note: if your are unable to immediately clear the fault code or contact your DCS Authorized
Service Center, wait for the oven cooling fans to stop, and then press the PUSH TO 
button
CLEAR
again. It is likely that the oven will now clear the fault. If it does not, then you may turn the oven off at the wall once the fans have stopped and the oven has completely cooled down.
Troubleshooting
Problem | Possible cause | What to do |
Oven does not work
Power supply is not | Have a service company/electrician |
connected. | check power connections, wiring and |
| fuses. |
|
|
Clock is not set due to | You must set the clock before you can |
power cut or failure. | use the oven. The oven will go into |
| ‘Set Up’ mode when the electricity is |
| restored after a power cut. The oven |
| mode and temperature displays will |
| show OFF. Both displays will be unlit |
| and unresponsive. The colon (:) in the |
| clock display will flash. See ‘Setting the |
| clock’. |
|
|
Oven door is open. | The elements are disabled by the door |
| switch when the door is open. Make |
| sure the door is properly closed. |
|
|
