
US CA
16
Using your oven
Using the meat probe
Use your meat probe to accurately judge when your meat is perfectly cooked. You can use the probe on TRUE CONV, CONV BAKE, ROAST, CONV BROIL and BAKE modes.
1 Select the oven mode and temperature. Preheat the oven | d | a | |||||
if appropriate. Remember ROAST and CONV BROIL do not |
|
|
|
|
|
|
|
require preheating. |
|
|
|
|
|
| b |
|
|
|
|
|
|
2Insert the metal probe horizontally into the center of the
| thickest part of the fully defrosted meat. The thicker the | c |
|
|
| ||
| meat, the longer it will take to cook, so it is important that |
|
|
|
|
|
|
| the probe is measuring the temperature of the meat at its |
|
|
|
|
|
|
| thickest point. Make sure the probe does not touch bone (pull |
|
| c | |||
|
|
| |||||
| probe away from bone ½”(1.5 cm), fat or gristle, as these will |
|
|
|
|
|
|
| heat up more quickly than the lean meat. |
|
|
|
|
|
|
3 | Place the meat on the broil/roast system. |
| a Metal probe | c Handle | |||
4 | When the oven has preheated (if required) to the set |
| b Plug | d Cable | |||
| temperature, place the broil/roast system in the oven and |
| |||||
|
|
|
|
|
|
|
insert the plug end of the meat probe into the probe socket, using an oven mitt if the oven is hot. The probe socket is on the left hand side of the oven, just under shelf position 7.
Make sure the probe is pushed completely into the socket, then close the oven door.
5Select the upper or lower oven for double models using the cavity selector button.
6Press the PROBE button on the control panel. The preset temperature of 150°F (65°C) and PROBE will light up in the display. If you want to select a different internal food temperature from the
preset temperature, rotate the PUSH TO button while the PROBE symbol is flashing. For
CLEAR
temperature guidelines, see the ‘Cooking guidelines’ section.
7During cooking, the display will show the actual internal temperature of the meat. To look at the set internal temperature, press PROBE.
8The oven will beep and automatically turn off when the meat reaches the set internal temperature. The temperature and oven mode displays will remain on and the oven light will go out.
9 Return the oven to manual operation by pressing the | PUSH TO | button. Turn the oven mode |
CLEAR | ||
and temperature knobs to OFF. |
|
|
To cancel the probe setting before the set temperature has been reached, press the PROBE button
and then the PUSH TO button.
CLEAR