DCS WOU-130 Care and cleaning, To cancel the SELF CLEAN mode before it has finished, Rotate the

PUSH TO

CLEAR

Care and cleaning

33

US CA

To cancel the SELF CLEAN mode before it has finished

Turn the oven mode and temperature knobs to OFF. CLEAN COOL will appear in the oven mode display and the door will remain locked until CLEAN END appears.

Important!

Do not turn off the mains power supply to the oven. The fans are needed to cool the oven.

Once the oven is cool or below the safe temperature, it will return to normal operation and the clock display will show the time of day.

Short self-clean cycle

You can select a shorter self-clean cycle if the oven is only lightly soiled:

1Select the SELF CLEAN mode by turning the oven mode knob.

2Turn the temperature knob to its maximum position. will appear in the display.

3While is showing, press the COOK TIME button. The COOK TIME and AUTO symbols and the colon will flash.

4	Rotate the	PUSH TO	button to reduce the time: this can be anywhere between two and three
		CLEAR

hours.

5Press the COOK TIME button again, or wait eight seconds to adopt the setting and start the self- clean cycle. The clock display will show the time remaining.

Self-clean – delayed start

You can set your oven to start a self-clean cycle at your convenience:

1Check that the clock shows the correct time.

2Select the SELF CLEAN mode by turning the oven mode knob.

3Turn the temperature knob to its maximum position. will appear in the display.

4While is showing, press the STOP TIME button. The STOP TIME and AUTO symbols and the colon will flash.

5 Set the time that you want the oven to finish by rotating the button. If there is time to wait before the self-clean cycle starts, AUTO and DELAY CLEAN will appear in the clock display.

6When the self-clean cycle starts, AUTO, DOOR LOCK and CLEAN will appear in the clock display and the time remaining will count down.