Amana AOCS3040 owner manual Prepare for Self-cleanand Delayed Self-cleanCycle, Self-cleaning

Prepare for Self-clean and

Delayed Self-clean Cycle

!WARNING

To avoid risk of personal injury, do not touch oven vents or areas around vents during self-cleaning. These areas can become hot enough to cause burns.

To avoid risk of smoke damage or fire, clean excess spills from oven interior.

Important

Some birds are extremely sensitive to the fumes given off during the self-clean cycle of any range. Move birds and small animals susceptible to fumes or smoke to another well-ventilated room.

•A small amount of smoke is normal when cleaning. Excess smoke may indicate a faulty gasket or too much food residue has been left in oven.

•Do not use cleaning cycle if oven light cover is not properly in place.

•Remove oven racks and all cooking utensils from oven.

Self-cleaning

Self-clean feature uses high oven temperature to clean oven interior.

1.Prepare oven for self-cleaning.

2.Press CLEAN pad.

3.Press + or - pad to adjust desired amount of cleaning time.

•Increase or decrease cleaning time by 5 minute increments.

•Clean can be set from 2 to 4 hours. Minimum recommended cleaning time is 3 hours.

•“LOCK” flashes while oven door is locking and remains in display while door is locked.

•Oven begins to clean automatically.

•After oven has cooled to a safe temperature, “LOCK” no longer displays and door is unlocked.

Delayed Self-clean Cycle

Self-clean feature uses high oven temperature to clean oven interior. Set oven to begin and end cleaning at later time using. Control calculates back from end time to determine starting time.

1.Prepare oven for self-cleaning.

2.Press CLEAN pad.

3.Press + or - pad to adjust desired amount of cleaning time.

•Increase or decrease cleaning time by 5 minute increments.

•Clean can be set from 2 to 4 hours. Minimum recommended cleaning time is 3 hours.

4.Press STOP TIME pad.

5.Press + or - pad until desired stopping time appears in display.

•Starting time is automatically calculated back based on amount of cleaning time and stop time. Oven begins to clean automatically.

•“LOCK” flashes while oven door is locking and remains in display while door is locked.

•To view remaining cleaning time, press and hold CLEAN pad.

•To view calculated stop time, press and hold STOP TIME pad.

•After oven has cooled to a safe temperature, “LOCK” no longer displays and door is unlocked.

Interrupt Self-Clean Cycle

1.Press OVEN CANCEL pad.

2.After oven has cooled to a safe temperature, door can be opened.

20