JVC KW-XR616, KW-XR614 manual Menu item Selectable setting, Initial Underlined

Category		Menu item	Selectable setting, [ Initial: Underlined ]
		FADER *5	R06 – F06	: Adjust the front and rear speaker output
			[ 00 ]	balance.
		BALANCE *6	L06 – R06	: Adjust the left and right speaker output
			[ 00 ]	balance.
		LOUD	• LOUD ON	: Boost low and high frequencies to produce a
		Loudness		well-balanced sound at a low volume level.
			• LOUD OFF	: Cancels.
		VOL ADJUST	VOL ADJ –05— : Preset the volume adjustment level of
		Volume adjust	VOL ADJ +05	each source (except FM), compared to the
			[ VOL ADJ 00 ]	FM volume level. The volume level will
				automatically increase or decrease when you
				change the source.
				• Before making an adjustment, select the
				source you want to adjust.
	AUDIO			• “VOL ADJ FIX” appears on the display if “FM” is
				selected as the source.
		L/O MODE	• SUB.W	: Select if the REAR LINE OUT terminals are
		Line output		used for connecting a subwoofer (through an
		mode		external amplifier).
			• REAR	: Select if the REAR LINE OUT terminals are
				used for connecting the speakers (through an
				external amplifier).
		SUB.W FREQ*7	• LOW	: Frequencies lower than 72 Hz are sent to the
		Subwoofer		subwoofer.
		cutoff frequency	• MID	: Frequencies lower than 111 Hz are sent to the
				subwoofer.
			• HIGH	: Frequencies lower than 157 Hz are sent to the
				subwoofer.
		SUB.W LEVEL*7	SUB.W 00 —	: Adjust the subwoofer output level.
		Subwoofer level	SUB.W 08
			[ SUB.W 04 ]
*5	If you are using a two-speaker system, set the fader level to “00.”
*6	This adjustment will not affect the subwoofer output.
*7	Displayed only when <L/O MODE> is set to <SUB.W>.

24

ENGLISH