JVC KW-XR614 Using the Bluetooth device, Registration Pairing methods, Registering using “OPEN”

Using the Bluetooth® device

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA200 (not supplied) to the expansion port on the rear of this unit.

•Refer to pages i and ii at the end of the manual to check the countries where you may use the Bluetooth® function.

•For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.

To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish a Bluetooth wireless connection between the unit and the device.

•Once the connection is established, it is registered on the unit even if you reset your unit. Up to five devices can be registered in total.

•Only one device can be connected at a time for each source (“BT-PHONE” and “BT-AUDIO”).

Registration (Pairing) methods

Use either of the following items (“OPEN” or “SEARCH” ) in the Bluetooth menu to register and make the unit ready to establish a new Bluetooth connection with a device.

“OPEN” : Connection is established by operating the Bluetooth device.

“SEARCH” : Connection is established by operating the unit.

Registering using “OPEN”

Preparation: Operate the device to turn on its Bluetooth function.

1

]“BT-PHONE” or “BT-AUDIO”

2

]“NEW DEVICE” ] “OPEN”

3

]Enter a PIN (Personal Identification Number) code in to the unit.

You can enter any number you like (1-digit to 16-digit number). [Initial: 0000]

• Some devices have their own PIN code. Enter the specified PIN code in to the unit.

4Repeat step 3 until you have finished entering the PIN code.

5

“OPEN..” flashes.

6Use the Bluetooth device to search and connect.

On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECTED” appears.

Now connection is established and you can use the device through the unit.

The device remains registered even after you disconnect the device. Use “CONNECT“ (or activate “AUTO CNNCT”) to connect the same device from next time on. ( 17)

ENGLISH

13