USB device playback

Bluetooth*2

Symptom

Remedy/Cause

• “CANNOT PLAY” flashes on the

• Attach a USB device that contains tracks encoded

display.

in an appropriate format.

“NO USB” appears on the display. • Reattach the USB device again.

The unit cannot detect the USB device.

While playing a track, sound is

The MP3/WMA tracks have not been properly

 

sometimes interrupted.

copied into the USB device.

 

 

Copy MP3/WMA tracks again into the USB device,

 

and try again.

 

 

 

 

 

Correct characters are not

This unit can only display letters (upper case),

 

displayed (e.g. album name).

numbers, and a limited number of symbols. (

9)

Bluetooth device does not detect

The unit can be connected with one Bluetooth

 

the unit.

mobile phone and one Bluetooth audio device at a

 

time.

 

 

 

While connecting a device, this unit cannot be

 

 

detected from another device. Disconnect currently

 

connected device and search again.

 

 

 

 

The unit does not detect the

• Check the Bluetooth setting of the device.

 

Bluetooth device.

• Search from the Bluetooth device. After the device

 

detects the unit, select “OPEN” on the unit to

 

 

connect the device. (

13)

 

 

 

 

The unit does not make pairing

• Enter the same PIN code for both the unit and

 

with the Bluetooth device.

target device.

 

 

Select the device name from “SPECIAL,” then try to connect again. ( 14)

Try to pair/connect from the Bluetooth device.

Echo or noise occurs.

Adjust the microphone unit position.

Phone sound quality is poor.

• Reduce the distance between the unit and the

 

Bluetooth mobile phone.

 

• Move the car to a place where you can get a better

 

signal reception.

 

 

The connected audio device

Check whether the connected audio device supports

cannot be controlled.

AVRCP (Audio/Video Remote Control Profile).

 

 

The sound is interrupted or

• Reduce the distance between the unit and the

skipped during playback of a

Bluetooth audio device.

Bluetooth audio device.

• Disconnect the device connected for “BT-PHONE.”

 

• Turn off, then turn on the unit.

 

• Connect the Bluetooth audio device again, when

 

the sound is not yet restored.

*2 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

34

ENGLISH

Page 34
Image 34
JVC KW-XR616, KW-XR614 manual Sometimes interrupted Copied into the USB device, Try again Correct characters are not, Time