Wyse Technology 883886-01 manual Upgrading Requirements, Udp

8 Chapter 2

Table 4 Communication Ports, Continued

WDM
Component	Protocol	Port	Function
Standard	OLE DB	1433 (default)	Communicate with the WDM
Service		Can be configured	Database.
		during installation
	HTTP	8008	Communicate with the GUI and Web
			Service.
Standard	DHCP	67	Process UDP requests from
Service and		68	PXE-enabled devices to the
PXE		4011	Standard Service.
	TFTP	69	Download bootable image to enable
			management processing.
	HTTP	80	Communicate with the Web Service
			regarding actions and status of
			current task.
	FTP	21	Download and upload files to the
			Master and Remote Software
			Repositories.
Standard	UDP	44956	Discover devices (using subnet
Service and		44957	directed broadcasts) that have older
legacy			WDM Agents (5.0.0.x and earlier)
support for			installed.
older WDM
	TCP	44955	Discover devices using IP Range
Agents
			Walking. Upgrade devices that have
			an older WDM Agent (5.0.0.x and
			earlier) installed.
ThreadX	TCP	9880	Uses these ports to communicate
Manager		50000	with ThreadX devices.
Service

Upgrading Requirements

WDM 4.9.1 supports an upgrade from WDM version 4.9.0 ONLY. You cannot upgrade from any other version.

IMPORTANT: After upgrading to WDM 4.9.1, you must upgrade all devices with the latest HAgent packages available to ensure your devices can be managed using WDM. Be sure to consult the latest WDM Release Notes.

WDM 4.9.0 supports direct upgrades from WDM version 4.8.0, or 4.8.5. If you are running WDM version 4.7.0 or 4.7.1, you must first upgrade to 4.7.2, and then upgrade to 4.8.5 before upgrading to 4.9.0.

Caution

Upgrading from WDM 4.7.2 to 4.8.5 is supported if the following hotfixes are installed in the following order prior to installing WDM 4.8.5: HF04072025609 and then HF04072036209.