36 | Appendix C |
| Figure 30 Binding and SSL Settings |
4.Keep the default value for IP Address as All unassigned and port as 21.
5.Select the Start FTP site automatically check box, change the SSL option to No SSL, and then click Next.
Figure 31 Authentication and Authorization Information
6.Select the Anonymous and Basic Authentication check boxes.
7.Select All users in the Allow access to list.
8.Select the Read and Write check boxes.
9.Click Finish.
Use the following guidelines to verify FTP on Windows Server 2008 R2:
1.Open a command prompt (click Start > Run, enter cmd, and then click OK).
2.Type ftp localhost.
3.Enter an administrator user name and password.
4.Ensure that login is successful.