Wyse Technology 883886-01 manual Service Location SRV

10	Chapter 2
	Figure 2 Service Location (SRV)

3.Select the Service Location (SRV) resource record type and then click Create Record to open the New Resource Record dialog box.

Figure 3 New Resource Record

4.Use the following guidelines (Domain is automatically shown):

•Enter _Pcoip-toolin the Service box.

•Enter _tcp in the Protocol box.

•(Optional) Enter the value you want for this WDM server in the Priority box (the lower the priority value the higher the priority).

•(Optional) Enter the value you want for this WDM server in the Weight box (within the same priority class the higher the weight value the higher the priority).

•Enter 50000 in the Port number box.

•Enter the <FQDN of the WDM server> (for example, p20.rap45.com) in the Host offering this service box.

5.Click OK.