Wyse Technology R90LW, R90L7, R50L, R10L manual Installing Xenith Pro Firmware, Requirements

Page 7

2 Installing Xenith Pro Firmware

This chapter includes the requirements and procedures you need to install and use Wyse® USB Firmware ToolTM to update your thin client to Xenith Pro firmware.

TIP: The purpose of the Wyse USB Firmware Tool is to configure a bootable USB key for device firmware. In the following procedures, you will create a configured USB key containing the firmware contents that you need, and then boot from this configured USB key on the thin clients you want to convert to push the contents of the USB key onto these target devices.

Requirements

Machine with a minimum of 16GB of free space running either of the following:

·Windows 2003 Server

·Windows Server 2008

·Windows Server 2008 R2

·Windows 7 Enterprise (32-bit and 64-bit)

·Windows 7 Ultimate (32-bit and 64-bit)

USB Key:

·USB 2.0 only

·USB key size should be 16 GB (see also “USB Keys - Troubleshooting Boot Issues” on page 9)

CAUTION: During the USB key configuration process the USB key will be reformatted.

Image 7
Contents Issue PN 883887-30L Rev. B Installation GuideCopyright Notices Contents IvContents This page intentionally blank Introduction Kit ContentsWyse Technical Support Requirements Installing Xenith Pro FirmwareInstall Wyse USB Firmware Tool ProceduresUpdate firmware options Browse for image file Prepare USB key for configuration Verifying Thin Client Operation Obtain a Firmware UpdateUSB Keys Troubleshooting Boot Issues Troubleshooting
Related manuals
Manual 84 pages 13.65 Kb