Wyse Technology R10L, R90L7, R90LW, R50L manual Update firmware options

Page 9

Installing Xenith Pro Firmware

5

Figure 3 Configuration options

3.Select the Configure the USB key to Copy/Pull or to Update/Push firmware option, and then click Next to open the Select the Configuration dialog box.

Figure 4 Update firmware options

4.Select the WTOS/Xenith/Xenith Pro operating system (OS) type option (note that OS Image, BIOS, and CMOS are selected by default).

5.Select the Update or Push Firmware operation to perform option.

6.Click Next to open the browse dialog box.

Image 9
Contents Issue PN 883887-30L Rev. B Installation GuideCopyright Notices Contents IvContents This page intentionally blank Introduction Kit ContentsWyse Technical Support Requirements Installing Xenith Pro FirmwareInstall Wyse USB Firmware Tool ProceduresUpdate firmware options Browse for image file Prepare USB key for configuration Verifying Thin Client Operation Obtain a Firmware UpdateUSB Keys Troubleshooting Boot Issues Troubleshooting
Related manuals
Manual 84 pages 13.65 Kb