Seagate ST34555N/W manual Terminator power, Circuits and data path widths

Page 23

Hawk 4XL Installation Guide, Rev. A

21

For information about how to terminate your drive, refer to the appropriate drive-specific section.

Internal SCSI cable

 

 

 

 

 

 

 

Internal

 

Internal

SCSI device

 

SCSI device

 

 

 

 

 

 

 

Controller

Terminate

Internal SCSI cable

 

 

 

 

 

 

 

 

 

 

 

Internal

 

Internal

 

Controller

SCSI device

 

SCSI device

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

External

SCSI cable

External

SCSI device

External

SCSI device

Terminate

Figure 2. SCSI bus termination

Terminator power

You usually will not need to change this option and can normally leave the drive configured as it was shipped from the factory. For information about how to change the terminator power option on your drive, refer to the appropriate drive-specific section.

I/O circuits and data path widths

“W” models have a “wide” (16-bit) SCSI data bus rather than the standard (non-wide) 8-bit SCSI data bus; however, you can use these wide drives on a standard (non-wide) 8-bit data bus using a terminated 68-pin to 50-pin SCSI cable.

Figures 3a, 3b, 3c, and 3d show typical drive connections. The following table lists the maximum cable lengths and number of devices with single-ended I/O circuits allowed on a daisy-chain cable for <10 and <20 M transfers/sec I/O data transfer rates.

Image 23
Contents Hawk 4XL Disc Drive ST34555N/W Installation Guide Contents Electrostatic discharge protection PrefaceImportant safety information and precautions Page Wichtige Sicherheitshinweise Page Hawk 4XL Installation Guide, Rev. a Electromagnetic compliance Regulatory agency complianceElectromagnetic susceptibility Australian C-Tick Electromagnetic compliance for the European UnionOnline services Seagate technical support servicesSeagate CompuServe forum SeaFAX FAX servicesSeagate technical support Direct-support servicesManufacturer’s representatives Customer service centersGeneral description RPM Drive characteristicsSingle-ended DC power requirements AmpsST34555N/W Dimensions of the drive Drive models General informationScsi ID jumpers Drive termination Circuits and data path widths Terminator powerCable characteristics for single-ended circuits Fifty pin I/O connection to drive N model Multiple drive connection to host adapter Multiple-drive connection to host adapter Providing adequate cooling Kühlung des Systems Suggested air flow Abbildung 4. Empfohlener Luftstromverlauf Installation des Laufwerkes und Anschluß der Kabel Mounting the drive and connecting cablesHawk 4XL Installation Guide, Rev. a DC power connector Abbildung 5. Gleichstromanschluß Hinweis Page Mounting configuration dimensions Quick reference desktop system notes Formatting the driveSetting the Scsi ID on model N drives Setting the Scsi ID jumpersTerminating the drive Terminating the driveSetting terminator power jumpers Additional jumper options Other applicable jumper optionsSetting the Scsi ID on model W drives Host Alternate Enable Scsi terminator Disable Scsi terminator Model only Terminator power Other option jumpers are available as illustrated below

ST34555N/W specifications

The Seagate ST34555N/W is a notable hard disk drive that was designed for enterprise and server environments, leveraging cutting-edge technology to meet high-performance requirements. Launched in the 1990s, it became a staple in many data-driven applications, especially in sectors demanding reliable storage solutions.

One of the primary features of the ST34555N/W is its storage capacity, providing users with 4.5 gigabytes of space. This was a significant value during its inception, allowing businesses to handle considerable amounts of data without the need for constant upgrades. The drive is built to accommodate various file types and to support extensive databases, making it ideal for enterprise-level applications.

The drive employs a 3.5-inch form factor, suitable for both desktop and server configurations. It features a SCSI interface, which was favored in many enterprise setups due to its fast data transfer rates and the ability to connect multiple drives in a daisy chain. Operating at a speed of 10,000 RPM, the ST34555N/W offers quick access to data, minimizing latency and enhancing overall system responsiveness.

Incorporating advanced error recovery features, the ST34555N/W ensures data integrity and reliability. The drive is equipped with Seagate's proprietary technologies that detect and correct errors in real-time, reducing the likelihood of data loss. This reliability made the ST34555N/W a trusted option for businesses relying on mission-critical applications.

Another essential characteristic of this hard drive is its thermal management capabilities. Operating within a specified temperature range, the ST34555N/W is designed to maintain performance under strenuous conditions, helping to prolong its lifespan.

Furthermore, the drive includes low power consumption features, making it an efficient choice for energy-conscious enterprises. The Seagate ST34555N/W exemplifies how storage technology evolved during its era, focusing on performance, reliability, and energy efficiency.

In summary, the Seagate ST34555N/W remains a noteworthy example of hard disk technology from the 1990s. With a solid performance profile, high data integrity, and reliable operational characteristics, it paved the way for the development of advanced storage solutions we see today. Even though modern drives have significantly surpassed its capabilities, the ST34555N/W remains a testament to Seagate's commitment to quality and innovation in data storage.