Troubleshooting
No Power
ξ Make sure the AC cord is plugged into the back of the LCD monitor. ξ Make sure the AC power cord is securely connected to an AC outlet.
ξ Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage.
No Image
ξ Make sure the power button is ON.
ξ Check whether the LCD monitor and computer power cords are plugged in and check the power supply.
Power is ON but No Screen Image
ξ ҏAdjust the brightness and contrast levels.
ξ Make sure the VGA or DVI cable is securely connected to both the computer and monitor.
“Out Of Range”
ξ Check the computer image output resolution and frequency and compare the value with the preset values of the computer’s graphics card.
Fuzzy Image
ξ Adjust the Phase setting on the monitor.
Image Too Bright or Too Dark
ξ Adjust the brightness and contrast levels using the OSD.
ξ Make sure that the computer is not displaying an irregular image.
ξ Check the VGA or DVI connection between the computer and LCD monitor. ξ Perform Auto Adjust.
Distorted Image
ξ Reset the LCD monitor by performing the “Reset” function using the OSD. ξ Remove extra accessories (such as a VGA extension cord).
Image is Not Centered (size is not scaled correctly)
ξ Perform Auto Adjust
ξ Adjust the horizontal and/or vertical position using the OSD. ξ Check image size setting.
Colors are Incorrect
ξ Adjust the color setting using the OSD.
Cannot display the LCD monitor with resolution 1400 x 1050
ξ Please download the video card driver from websites below: Nvidia: http://www.nvidia.com/content/drivers/drivers.asp Intel:
19