Tyan Computer B5102, GX21 manual Safety Information

Page 6

SAFETY INFORMATION

Before installing and using the Transport GX21, take note of the fol- lowing precautions:

–Read all instructions carefully.

–Do not place the unit on an unstable surface, cart, or stand.

–Do not block the slots and opening on the unit, which are pro- vided for ventilation.

–Only use the power source indicated on the marking label. If you are not sure, contact the Power Company.

–The unit uses a three-wire ground cable, which is equipped with a third pin to ground the unit and prevent electric shock. Do not defeat the purpose of this pin. If your outlet does not support this kind of plug, contact your electrician to replace your obsolete outlet.

–Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.

–Follow all warnings and cautions in this manual and on the unit case.

–Do not push objects in the ventilation slots as they may touch high voltage components and result in shock and damage to the components.

–When replacing parts, ensure that you use parts specified by the manufacturer.

–When service or repairs have been done, perform routine safety checks to verify that the system is operating correctly.

–Avoid using the system near water, in direct sunlight, or near a heating device.

–Cover the unit when not in use.

iv

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Transport GX21 B5102 Page Copyright DisclaimerTrademark Recognition Federal Communications Commission FCC About this Manual ConventionsSafety Information Table of Contents Appendix System Requirements OverviewAbout the Transport GX21 B5102 About the Transport GX21 B5102Features FeaturesBox Contents B5102G21S2H and B5102G21S2 UnpackingUnpacking Unpacking Accessories Tyan driver CD P/NUnpacking Opening the box About the Product About the ProductFront View About the Product Rear View About the Product Internal View B5102G21S2H CD-ROMAbout the Product Internal View B5102G21S2 About the Product Motherboard Block Diagram ICH5Before You Begin Setting UpBefore You Begin Work AreaBefore You Begin Precautions Rack Mounting Installing the Server in a RackRack Mounting Rack mounting kitRack Mounting Rack Mounting Rack Mounting Installing Motherboard Components Installing Motherboard ComponentsRemoving the Chassis Cover Pull the CPU lever up to unlock the CPU socket Pin Installing Motherboard Components Installing Motherboard Components Installing Memory Installing a PCI Card Installing Motherboard Components Reinsert the PCI card clamp Insert the screw to secure the PCI card to the chassis Installing a Hard Drive Installing a Hard DriveInstalling a Hard Drive Setting Up Installing a Hard Drive Installing a Hard Drive Replacing Pre-Installed Components IntroductionIntroduction Introduction Precautions Disassembly Flowchart Disassembly FlowchartRemoving the Cover Removing the CoverReplacing Motherboard Components Replacing Motherboard ComponentsRemoving Add-On Components from the Motherboard Replacing Motherboard Components Disconnecting Cables Replacing Motherboard Components Replacing Motherboard Components Removing the Motherboard Replacing the CD-ROM/FDD Replacing the CD-ROM/FDDReplacing the CD-ROM/FDD Replacing the FDD with a HDD Replacing the FDD with a HDDReplacing the FDD with a HDD Replacing the LED Control Board Replacing the LED Control BoardReplacing the S-ATA Backplane Replacing the S-ATA BackplaneReplacing the S-ATA Backplane Function set switch Replacing the Power Supply Replacing the Power SupplyReplacing the Power Supply Replacing the Cooling Fans Replacing the Cooling FansReplacing the Cooling Fans Replacing the Cooling Fans Replacing the Cooling Fans Appendix Bios Setup InstallationNavigation Keys Starting SetupSetup Basics Getting HelpCase of Problems Differences in SetupBios Setup Main Screen Supervisor / User Password Load Fail-Safe DefaultsLoad Optimized Defaults Save & Exit SetupStandard Cmos Features Phoenix AwardBIOS Cmos Setup Utility Standard Cmos FeaturesDrive a / B Date / Time SetupIDE Master / Slave Setup VideoVirus Warning Advanced Bios FeaturesPhoenix AwardBIOS Cmos Setup Utility Advanced Bios Features CPU L1 & L2 CacheQuick Power On Self Test Boot SequenceHyper-Threading Technology Bootup NumLock Status Phoenix AwardBIOS Cmos Setup Utility Boot SequenceGate A20 Option Typematic Rate Chars/Sec Typematic Rate SettingTypematic Delay Msec Security OptionApic Mode MPS Version Control For OSOS Select For Dram 64MB HDD S.M.A.R.T. CapabilityReport No FDD For WIN Small Logo EPA ShowAdvanced Chipsets Features Dram Timing SelectableCAS Latency Time System Bios Cacheable Active to Precharge DelayDram RAS# to CAS# Delay Video Bios CacheableDelay Prior to Thermal Dram Data Integrity Mode Integrated Peripherals Phoenix AwardBIOS Cmos Setup Utility Integrated PeripheralsPhoenix AwardBIOS Cmos Setup Utility OnChip IDE Device OnChip IDE DeviceIDE HDD Block Mode On-Chip Primary PCI IDEPrimary / Secondary Master/ Slave PIO Primary / Secondary Master/ Slave UdmaOn-Chip Serial ATA Onboard Device Serial ATA Port 0/1 ModePhoenix AwardBIOS Cmos Setup Utility Onboard Device USB ControllerOnboard Promise RAID Ctrl USB Keyboard SupportUSB Mouse Support CSA LAN GbE LANSuper IO Controller Uart Mode SelectPhoenix AwardBIOS Cmos Setup Utility Super IO Device Onboard FDC ControllerIR Transmission Delay UR2 Duplex ModeRxD, TxD Active Parallel Port Mode Onboard Parallel PortEPP Mode Select ECP Mode Use DMAPower Management Setup Phoenix AwardBIOS Cmos Setup Utility Power Management SetupAcpi Function Mode Doze Standby Suspend HDD Power Down Power Management OptionPower Management Modes Video Off MethodVideo Off In Suspend Choices areSuspend Mode Suspend TypeModem Use IRQ HDD Power Down CPU THRM-ThrottlingPwron After PWR-Fail Power On SetupPhoenix AwardBIOS Cmos Setup Utility Power On Setup Soft-off by PWR-BTTNResume by Alarm Power on by RingPower on by Giga Lan Power on FunctionKB Power on Password Hot Key Power onReload Global Timer Events PnP/PCI Configurations Reset Configuration DataPCI 1 INT Assignment Resources Controlled ByPCI / VGA Palette Snoop CNR LAN INT AssignmentPromise S-ATA INT Assignment Intel i541 INT AssignmentCPU Warning Temperature Phoenix AwardBIOS Cmos Setup Utility PC Health StatusPC Health Status Shutdown Temperature Frequency/Voltage Control CPU Clock RatioAuto Detect Dimm / PCI Clk Spread SpectrumLoad Fail-Safe Defaults Y/N? N Memory Frequency for DDR Frequency at Next BootLoad Fail-Safe Defaults CPU ClockLoad Optimized Defaults Supervisor/User Password SettingLoad Optimized Defaults Y/N? N Enter Password Save to Cmos and Exit Y/N? Y Save & Exit SetupExit Without Saving Quit without saving Y/N? YMotherboard SpecificationChassis ExpansionPower Supply VideoStorage Controller Hardware Diagram Returning Merchandise for Service Technical SupportHelp Resources 104

GX21, B5102 specifications

The Tyan Computer B5102, GX21 is a cutting-edge server motherboard designed to cater to the needs of performance-intensive applications. Built with the latest technologies, it represents the fusion of processing power, reliability, and flexibility, making it an ideal choice for businesses and data centers.

One of the standout features of the B5102, GX21 motherboard is its support for dual Intel Xeon processors. This capability enables it to handle heavy computational tasks and offers remarkable scalability. The motherboard supports various Intel Xeon Scalable processors, which incorporate features like advanced security and memory management, ensuring that users can effectively manage their workloads while maintaining efficiency.

In terms of memory, the Tyan B5102, GX21 supports up to 2TB of DDR4 memory across its 16 DIMM slots. This substantial memory capacity allows for high-performance computing and data processing, making it suitable for applications ranging from virtualization to big data analytics. The motherboard also supports memory speeds of up to 3200MHz, ensuring rapid data access and improved performance in memory-intensive tasks.

The B5102, GX21 motherboard is equipped with multiple expansion slots, including PCIe 4.0 slots, which provide ample room for additional graphics cards, storage controllers, and network interfaces. This feature enhances the motherboard's capability for custom configurations, allowing users to tailor their systems to fit specific application requirements, whether for gaming, simulation, or scientific computation.

Another notable aspect of the Tyan B5102, GX21 is its support for various storage technologies. It features multiple SATA interfaces for traditional hard drives and SSDs, as well as M.2 connectors for NVMe SSDs. This flexibility ensures that users can achieve optimal performance and efficiency in data storage, with quick access speeds and reliable data management.

The motherboard also prioritizes connectivity and manageability. Built-in dual Gigabit Ethernet ports enable efficient networking, while dedicated management interfaces allow for remote monitoring and control, making it easier for IT departments to maintain and manage server workloads.

In conclusion, the Tyan Computer B5102, GX21 is a robust motherboard that stands out for its powerful processor support, extensive memory capabilities, and ample connectivity options. It is a versatile and reliable platform suitable for various high-performance applications, making it an excellent choice for modern data center environments.
Top Page Image Contents