Watlow Electric Gateway & DeviceNet manual

RUI/Gateway & DeviceNetTM

Configuration & Ladder Logic Example

Using an Allen-Bradley CompactLogix PLC

Reading and Writing to/from RUI/Gateway Using RSLogix 5000

24.The rung of logic below when enabled, will execute an explicit message sent to the gateway where it will then be routed out over Standard Bus to the EZ-ZONE®PM control defined by the instance (oSt prompt). Because the CIP offset is set to 12 for gateway instance 4 this message will be routed to PM4. When done, the destination tag identified under the configuration tab “EEPROM _Status” (see below) will contain the value of either 106 being enabled or 59 being disabled.

Watlow
1241 Bundy Blvd
Winona, MN 55987
Telephone: 507-494-5656
© 2007 Watlow Electric Mfg Co	13	4/08