RUI/Gateway & DeviceNetTM
Configuration & Ladder Logic Example
Using an
The PLC will need to be in the program or remote program mode for this to occur. When written this completes the configuration of the RUI/Gateway using RSNetWorx.
Configuration of the RUI/Gateway
17.Prior to looking at the PLC side of things let’s first take a look at a possible network configuration. The graphic below depicts a network consisting of an RUI/ Gateway with a PLC
on one side talking DeviceNetTM where on the other side of the gateway we see four EZ- ZONE® PM controls talking Standard Bus. Now, seeing the network layout, the next step is to configure the RUI/Gateway.
Watlow |
|
|
1241 Bundy Blvd |
|
|
Winona, MN 55987 |
|
|
Telephone: |
|
|
© 2007 Watlow Electric Mfg Co | 9 | 4/08 |