Tyco Electronics ET1528L manual Troubleshooting, Solutions to Common Problems

Page 26

CHAPTER

TROUBLESHOOTING

If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Elo Technical Support numbers are listed on page 28.

Solutions to Common Problems

Problem

Suggestion(s)

The monitor does not respond

Check that the monitor’s Power Switch is on.

 

Turn off the power and check the monitor’s power

Characters on the screen are dim

 

cord and signal cable for proper connection.

Refer to the Controls and Adjustments section to

The screen is blank

adjust the brightness.

During operation, the monitor screen may

 

 

automatically turn off as a result of the Power

 

 

Saving feature. Press any key to see if the screen

 

 

reappears.

 

Refer to the Controls and Adjustments section to

OSD or power buttons don’t work

adjust the brightness.

Check to see that they are not locked out. See

“Out of Range” monitor

page 13.

Check to see of the resolution or vertical

 

 

frequency of your computer is higher than that of

 

the LCD monitor.

 

Reconfigure the resolution of your computer to

 

 

make it less than or equal to 1024x768. 1024x768

 

 

is optimal. See Appendix A for more information

Touch doesn’t work

on resolution.

Make sure cable is securely attached at both ends.

18

Image 26
Contents Touchmonitor User Guide User Guide Inch LCD Desktop 1528L TouchmonitorIii Page EMC Guidance CisprImmunity Test IEC60601 test level Vii Classification Environmental conditions for transport and storageTable of Contents Contact ELO Product Description LCD Monitor Performance FeaturesIntroduction Inch TFT LCD Monitor PanelExternal Medical Grade Power Adapter Installation and Setup Unpacking Your TouchmonitorProduct Overview Front View Rear ViewUSB Interface Connection Side View Kensington LockRemove the Cable Cover Page Optimizing the LCD Monitor Installing the Touch Driver SoftwareReplace the Cable Cover Installing the USB Touch Driver Click Start RunPage About Touchmonitor Adjustments OperationOSD Menu Functions Controls and AdjustmentPower Lock/Unlock OSD Lock/UnlockRecalls the factory OSD default settings OSD Control Options ClockwiseMonitor Angle desktop only Power LED Monitor & Power SavingGeneral Power Saving Mode Page Troubleshooting Solutions to Common ProblemsNative Resolution Input Video 15.0 LCDTouchmonitor Safety Care and Handling of Your Touchmonitor Technical Specifications Display Modes1528L Touch Display Specifications Monitor ModePower Adapter Cord Selection North AmericaCord selection for other than North America Cert Country Agency MarkHAR Flexible Cord Environmental MechanicalOptical AccuTouch resistive Technology Touchscreen Specifications Construction Positional AccuracyDurability CarollTouch infrared Technology Touchscreen SpecificationsElectrical Contact Elo TouchSystems Replacement PartsContact ELO Touchsystems Electrical Safety Information Regulatory InformationPage Page Warranty