Tyco Electronics ET1528L manual Replace the Cable Cover, Optimizing the LCD Monitor

Replace the Cable Cover

After you have attached all the cables to the monitor; gently bring all the cables toward the center so they fit under the cable cover lip. Snap the cable cover in place over the connections.

Optimizing the LCD Monitor

To ensure the LCD monitor works well with your computer, configure the monitor mode of your graphic card to make it less than or equal to 1024 x 768 resolution, and make sure the timing of the monitor mode is compatible with the LCD monitor. Refer to Appendix A for more information about resolution. Compatible video modes for your touchmonitor are listed in Appendix C.

Installing the Touch Driver Software

Driver software that allows your touchmonitor to work with

your computer comes with the Elo TouchSystems monitor. Drivers are located on the enclosed TouchTools CD-ROM for the following operating

systems:

•Windows XP

•Windows 2000

•Windows Me

•Windows 98

•Windows 95

•Windows NT 4.0

•CE 2.x, 3.0, 4x

•Windows XP Embedded

•Windows 3.x

•MS DOS •OS/2

10