Installing the Touch Driver

Your Elo touchmonitor is Plug-and-Play compliant. Information on the video capabilities of the touchmonitor is sent to the video display adapter when the computer’s operating system starts. If the computer’s operating system detects the touchmonitor, follow the instructions on the screen to install a generic Plug-and-Play monitor.

Elo TouchSystems provides touchscreen driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD.

The latest versions of drivers and driver information for all operating systems, including those that are not included with the CD, are avail- able on the Elo TouchSystems website at www.elotouch.com/sup- port/downloads/.

To install the Touch Driver, follow the steps below:

1Insert the TouchTools or APR CD in your computer’s CD-ROM drive.

2Click on Install Driver for This Computer.

3Follow the on-screen instructions to complete the installation.

If there are no on-screen instructions when you install the

TouchTools or APR CD :

1Click Start > Run.

2Click the Browse button to locate the EloCd.exe program on the CD-ROM.

3Click Open, then OK to run EloCd.exe.

4Follow the directions on the screen to complete the driver installation.

Elo TouchSystems 1900L User Guide 10