Tyco Electronics 15A2 manual Touchcomputer Specifications, Ram

Page 41

Touchcomputer Specifications

Note: Not all operating systems or options are supported in all regions. Please contact your local Elo TouchSystems representative for details.

Processor	Intel Celeron M 1.0GHz CPU w/400MHz Front-Side Bus
RAM	1GB DDR2 RAM standard. Up to 2GB max.
Northbridge	Intel 915GME
Southbridge	Intel ICH6
Video	Intel GMA 900 Up to 128MB shared w/ DVMT
Operating systems	Microsoft Windows XP Professional
	Microsoft Windows XP Embedded
	Microsoft Windows Embedded for Point of Service (WEPOS)
	Microsoft Windows Vista Business
Ports	4 x USB 2.0 ports
	1 x 12V powered USB 2.0 port
	1 x 12V cash drawer port OR 1 x RJ11 modem port (BIOS
	selectable)
	1 x 10/100 Base-T ethernet port
	2 x Serial ports (RJ connector)
	COM1, RS232, COM2 selectable RS232/RS422/RS485
	1 x Microphone input 3.5mm
	1 x Audio Output 3.5mm
	1 x VGA output
	1 x PS/2 Universal
Expansion	1 x MiniPCI for type IIIA/B MiniPCI cards
Compact Flash	One socket, internal user accessible
Wireless networking	Wireless ready w/ antennas pre-installed for miniPCI wireless
	card.
BIOS	ACPI 2.0, APM 1.2, SMBIOS 2.4, PXE, WOL
Real Time clock	Replaceable lithium-ion battery for clock
Storage	XP/WEPOS/VISTA: 40 GB HDD(minimum)
	XP Embedded 1 GB Compact Flash
Power supply	Type: External brick
	Input (line) voltage: 100-240 VAC, 50-60 Hz
	Output voltage/current: 12 V at 10 amps max.
	120 watts minimum
Power dissipation	100 W Typical
Temperature	Operating: 0oC to 35oC
	Storage: -20oC to 60oC
Humidity	Operating: 20%-80%
	Storage: 5%-95%
	noncondensing

Elo TouchSystems 15A2 User Guide 41

Image 41

Contents Touchcomputer User Guide Elo TouchSystems Touchcomputer User Guide Disclaimer Copyright c 2008 Tyco Electronics. All Rights ReservedTable of Contents Regulatory Information Warranty Unpacking Your Touchcomputer SetupFront View Rear View Product OverviewSide View Base Bottom View Display Orientation Display Orientation with Peripherals Language Selection Initial Turn-OnPage Time-zone selection Calibration Testing the TouchscreenTest Devices Testing in USB MSR Human Interface Device HID Mode Testing the Magnetic Stripe Reader MSR optionalTesting in USB MSR Keyboard KB Emulation Mode Converting MSR from Keyboard Emulation to HID and vice versa Testing the Customer Display optional Testing the Finger Print Reader optional Testing the Barcode Scanner optional Page Enabling 2-D Scanning Testing the Speaker Bar optional Testing the TV tuner optional Testing the Wireless Card optionalTesting the Modem Cardoptional Testing the Cash Drawer PortElo TouchSystems 15A2 User Guide Operation OSD Menu OSD ControlShortcut keys OSD LockoutTo lock the OSD To unlock the OSDPower Button Power ControlPower Lockout To lock the PowerUsing the I/O panel KensingtonTM Lock PS/2 UniversalTV Tuner optional Mounting Option Securing the Touchcomputer BaseSnap off stand cover Mount as shownBottom View Display Angle Adding Peripherals UpgradesMaintenance Waste Electrical and Electronic Equipment Weee Directive Care and Handling of Your Touchcomputer Servicing the Hard Disk Drive and Compact Flash Card To Install the Hard Disk DriveTo Install the Compact Flash Card Recovering the Operating SystemTechnical Specifications RAM Touchcomputer SpecificationsPage RS485 Mode Pin Definitionfor COM2 only COM1, COM2 ConnectorRS232 ModeRS422 Mode Pin Definitionfor COM2 only Power Input Pin Definition Control Cash Drawer Port Signal Definition and ControlESY15A2 Display SpecificationsPower Supply Specifications Touchscreen Specifications Magnetic Stripe Reader MSR Peripheral SpecificationsCustomer Display USB VersionFingerprint Reader Barcode Scanner One-Dimensional scanner specificationsSpeaker Bar TV Tuner Card Wireless CardModem Card Temperature Ranges Environmental SpecificationsUsing the Web Using the Phone Using the TouchcomputerTechnical Support Technical AssistanceII. Emissions and Immunity Information Electrical Safety InformationRegulatory Information Page III. Safety Label Warranty Page Check out Elo’s Website